Abrasive Cloth Roll GRAPHITE 2.5 m x 115 mm K150 for sanding and surface preparation

Abrasive Cloth Roll GRAPHITE 2.5 m x 115 mm K150 is a flexible sanding roll intended for fine finishing and surface preparation. Supplied in a 2.5 metre length and 115 mm width with K150 grit, the roll can be cut to desired lengths for manual or machine use. It is suitable for smoothing wood, removing minor imperfections on metal, and matting painted surfaces prior to coating or polishing. The cloth backing provides tear resistance and stable performance during continuous sanding operations.

Advantages

The abrasive cloth combines medium-fine K150 grit with a durable fabric backing to deliver consistent abrasion and long service life. Its roll format enables custom length cuts, reducing waste and adapting to different tools such as belt sanders, sanding blocks or hand-held pads. The product offers reliable dust clearance and uniform finish when used correctly, and its construction supports repeated use without rapid tearing.

Suitable for

• Fine sanding and finishing of wooden surfaces
• Surface preparation of painted or lacquered items before repainting
• Light deburring and smoothing of metal parts
• Workshop repair and furniture restoration tasks

Key specifications

• Length: 2.5 m
• Width: 115 mm
• Abrasive grit: K150 (fine)
• Backing: cloth (fabric) for tear resistance
• Suitable for manual and machine sanding

How to use

Cut the required length from the roll to fit the sanding tool or hand block. For manual sanding, wrap the cloth around a sanding block or use by hand with even pressure, moving with the grain on wood to avoid scratch patterns. For machine use, install and secure the strip according to the sander manufacturer’s instructions. Use moderate pressure and steady, overlapping passes until the desired smoothness is achieved. Replace the abrasive piece when the grit becomes clogged or worn.

Usage recommendations

Wear appropriate personal protective equipment such as safety glasses and a dust mask when sanding. For painted surfaces, test on a small area to ensure compatibility and avoid overheating the substrate. Clean the workpiece between grit changes and progress to finer abrasives for a smoother finish.