Manual sanding supply GRAPHITE 55H914 — for wood, 115 mm width, 72 g, 1 pcs

GRAPHITE 55H914 manual sanding supply is an abrasive sponge designed for finish grinding and manual surface preparation. Intended primarily for woodworking, it has a working width of 115 mm and a net weight of 72 g. Supplied as one piece per pack, the abrasive sponge features abrasive grain coating on both sides and a soft structure that adapts to contoured surfaces. It is suitable for wet and dry processing and can be cut into smaller pieces to reach confined or irregular areas.

Advantages

The abrasive sponge provides even finish sanding thanks to its dual-sided abrasive coating and soft, conformable body. Its compatibility with wet and dry processing increases versatility for different working conditions. A compact single-piece supply makes it practical for manual smoothing, edge finishing and preparing wood surfaces for subsequent treatments. The ability to cut the sponge allows precise work in hard-to-reach spots without damaging surrounding areas.

Suitable for

• Manual surface finishing of wood
• Smoothing edges and contours
• Preparation of wood before painting, varnishing or glueing
• Finish grinding of putty, finish coats and gypsum
• Wet or dry sanding of small areas and irregular profiles

Key specifications

• Working width: 115 mm
• Overall dimensions: 120 x 95 x 10 mm
• Abrasive grit: 180
• Coating: abrasive grain on both sides
• Weight: 72 g
• Processing: suitable for wet and dry use
• Material compatibility: wood, paints, varnishes, putty, gypsum, plastics, metal (finish sanding)
• Pack quantity: 1 piece

How to use

Select the appropriate grit for the level of material removal required and, if necessary, cut the sponge to a smaller shape for tight areas. Use the sponge by hand with light to moderate pressure, following the grain of the wood for best results. Rinse and wring out the sponge when performing wet sanding to maintain abrasive performance, and allow the surface to dry between coarse and fine passes if subsequent coatings will be applied.

Usage recommendations

For wood finishing, start with the 180-grit abrasive sponge for light smoothing and finish with a finer abrasive if a smoother surface is needed before varnishing or painting. When sanding painted or varnished surfaces, test in an inconspicuous area first. Store the sponge dry and away from direct heat to preserve its conformable structure.