Manual sanding supply GRAPHITE 55H915 – sanding block for wood, 115 mm width, 138 g, 1 pc

GRAPHITE 55H915 is a manual sanding supply designed as an abrasive sponge and sanding block for wood and other materials. The unit is supplied as a single piece with a width of 115 mm and a net weight of 138 g. The sponge portion measures 70 x 25 x 10 mm, features a 60 grit abrasive for finish grinding, and has abrasive grain coating on four sides. Its soft structure allows the sponge to adapt to contours, and it can be cut into smaller pieces for access to tight or irregular areas. The product is suitable for both wet and dry processing and is compatible with standard sanding sheets intended for 115 mm tools.

Advantages

The abrasive sponge offers a combination of adaptability and abrasive performance: a soft foam body that conforms to profiles and edges while a 60-grit coating provides effective finish grinding. Coating on all four sides increases usable surface area, extending service life before replacement. The compact dimensions and light weight make the tool easy to handle for manual sanding tasks and enable precise control when preparing surfaces prior to painting, staining or varnishing. The ability to use the sponge wet or dry and to cut it for detailed work increases versatility across different materials and repair tasks.

Suitable for (tasks / use cases)

• Manual sanding and smoothing of wooden surfaces before finishing
• Finish grinding of putty, finish coats and gypsum
• Surface preparation of paints, varnish coatings and plastics
• Light abrasive work on metal and small repair areas
• Wet or dry sanding in confined or shaped areas after cutting the sponge

Key specifications

• Product type: abrasive sponge / sanding block
• Primary material compatibility: wood, putty, gypsum, paints, plastics, metal, varnish coatings
• Abrasive grit: 60 (finish grinding)
• Sponge dimensions: 70 x 25 x 10 mm (abrasive sponge section)
• Block width: 115 mm
• Weight: 138 g
• Coating: abrasive grain on four sides
• Processing: suitable for wet and dry use

How to use

Select a clean, appropriate grit for the task; the GRAPHITE 55H915 features 60-grit abrasive for finish grinding. Hold the sanding block or cut the sponge into smaller pieces where needed for tight areas. Apply even pressure and move the sponge along the grain on wood or across the surface to achieve an even finish. For wet sanding, lightly moisten the sponge and the surface, and maintain consistent strokes to avoid local over-sanding. After use, clean residues from the abrasive surfaces by tapping or rinsing when wet, and allow the sponge to dry before storage.

Usage recommendations

Use the abrasive sponge progressively with care: begin with lighter passes to assess material removal, keep movements even and aligned with the surface profile, and replace the sponge once abrasive performance diminishes. For best results on wood, sand along the grain and finish with a finer grit if a smoother surface is required before painting or varnishing.