Manual sanding supply GRAPHITE 55H921 — sanding sleeve for wood, 115 mm width, 1 pc

GRAPHITE 55H921 manual sanding supply is a single-piece sanding sleeve designed for woodwork and finish grinding. This sanding sleeve is 115 mm wide and supplied as one unit per pack, weighing approximately 62 g. It is intended for smoothing wooden surfaces, removing old finishes and preparing wood for painting or varnishing. The abrasive sponge version (70 x 25 x 10 mm, grit 240) included in the GRAPHITE 55H921 range is suitable for finish grinding of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings, and can be used for both wet and dry processing.

Advantages

The product combines a wide 115 mm sanding sleeve format with an abrasive sponge option featuring 240 grit for fine finishing. The sponge has abrasive grain coating on four sides and a soft structure that adapts to shaped and curved surfaces, allowing improved contact and consistent results. Its compact size and single-piece packaging make it convenient for manual sanding and small repair jobs. The sponge can be cut into smaller pieces to access tight or hard-to-reach areas.

Suitable for

• Sanding and smoothing wooden surfaces
• Removing old paint, varnish or finish layers
• Finish grinding of putty and topcoats
• Wet and dry sanding of paint, plastics and varnish coatings
• Detail work and shaping in carpentry and repair tasks

Key specifications

• Product type: manual sanding supply / sanding sleeve and abrasive sponge
• Sanding sleeve width: 115 mm
• Abrasive sponge dimensions: 70 x 25 x 10 mm
• Abrasive grit: 240 (finish grinding)
• Weight (single unit): approx. 62 g
• Suitable processing: wet and dry
• Abrasive coverage: grain coating on four sides of the sponge

How to use

Select the sanding sleeve or abrasive sponge depending on the task and desired surface finish. For broad surface work on wood, apply the 115 mm sanding sleeve with steady, even strokes following the wood grain to avoid scratching. For finish grinding and detailed work, use the 70 x 25 x 10 mm abrasive sponge with 240 grit, adapting pressure to the material and working direction. The sponge may be trimmed to create smaller pieces for edges, profiles and hard-to-reach areas. When working wet, ensure the sponge and surface are compatible with moisture and dry surfaces thoroughly before applying paint or varnish.

Usage recommendations

Use progressively finer grits when preparing surfaces for painting or varnishing: begin with coarser sanding for heavy removal, then finish with the 240-grit abrasive sponge for a smooth result. Wear appropriate personal protective equipment such as a dust mask and eye protection when sanding dry, and follow safe handling practices for wet sanding to avoid slips or damage to sensitive materials.