Manual sanding supply GRAPHITE 55H926 — sanding sponge for wood, grit K120, width 93 mm, 1 pc

Angle sanding sponge GRAPHITE, size 98 x 25 x 68 mm with 120 grit, designed for finishing tasks. The sponge is coated with abrasive grain on four sides and shaped to fit the hand, with one oblique side and one curved side to reach corners and contoured surfaces. It is suitable for both wet and dry sanding and intended for manual use on materials such as putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings.

Advantages

The sanding sponge offers a compact ergonomic shape that improves grip and access to tight spots. Abrasive coating on multiple faces and mixed side geometries (oblique and curved) allow flexible use on flat, angled and curved surfaces. Its 120-grit abrasive is suitable for fine removal and smoothing during finishing work, and the sponge construction supports both wet and dry processing.

Suitable for

• Manual sanding and smoothing of putty and finish coats
• Sanding gypsum, paints and varnish layers
• Finishing work on wood and plastics
• Light sanding and surface preparation on metal

When it may not be suitable

This 120-grit sanding sponge is intended for finishing and light material removal; it is not suitable for heavy stock removal or aggressive shaping tasks that require coarser abrasives. For large-area sanding with high material removal rates, power tools with dedicated abrasive discs will be more efficient.

Key specifications

• Dimensions: 98 x 25 x 68 mm
• Abrasive grit: 120
• Coating: Abrasive grain on four sides
• Use: Wet and dry sanding
• Weight: approx. 60 g

How to use

Hold the sponge in the hand so the oblique or curved side matches the surface profile, and sand with even pressure along or across the grain of the material as appropriate. For wet sanding, moisten the sponge slightly and drain excess water; for dry sanding ensure dust is cleared frequently to maintain abrasive effectiveness. Replace the sponge when the abrasive surface becomes worn or clogged.

What to consider before purchase

• Intended use: finishing and light smoothing rather than heavy material removal
• Surface compatibility: suitable for wood, plaster, paints, plastics, metal and varnishes
• Grit choice: 120 grit is medium–fine for finishing tasks
• Quantity: sold as a single piece per pack

Usage recommendations

Use gentle, consistent pressure and choose the oblique or curved side to reach corners and profiles. For best results on painted or varnished surfaces, finish with a lighter touch and inspect frequently to avoid over-sanding.