Manual sanding supply GRAPHITE 55H927 for wood, sanding width 93 mm, 1 pc

GRAPHITE 55H927 is a manual angle sanding sponge designed for finishing and smoothing wooden surfaces. With a sanding width of 93 mm and compact dimensions of 98 x 25 x 68 mm, this single-piece sanding supply is intended for manual surface preparation, edge and profile work, and final finishing in carpentry, repair and DIY tasks. The sponge carries abrasive grain on four sides and is suitable for both wet and dry processing, providing versatility for a range of materials including wood, putty, finish coats, gypsum, paints, plastics, metal and varnish coatings.

Advantages

The abrasive sponge features a comfortable shape that fits well in the hand and combines an oblique side and a curved side to reach tight or irregular areas. Its four-sided abrasive coating allows extended use between rotations while the compact size supports precision work on edges and profiles. The wet-and-dry compatibility increases flexibility for different stages of surface preparation and finishing.

Suitable for

• Manual sanding and finishing of wooden panels, edges and profiles
• Smoothing putty and finish coats before painting
• Sanding gypsum, plaster and drywall surfaces
• Surface preparation of paints, varnishes and plastic components
• Light abrasive work on metal and varnish coatings

Key specifications

• Sanding width: 93 mm
• Overall dimensions: 98 x 25 x 68 mm
• Abrasive grit: P180 (180 grit)
• Shape: angle sponge with one oblique side and one curved side
• Abrasive coating: on four sides of the sponge
• Processing: suitable for wet and dry sanding
• Pack quantity: 1 piece

How to use

Select the GRAPHITE 55H927 sanding sponge for the required grit and ensure the work surface is clean and free of loose debris. Hold the sponge so the oblique or curved side matches the profile you need to treat and apply even, controlled pressure while moving along the surface. For finishing wood or putty, use light strokes and check progress frequently to avoid over-sanding. Rinse and wring the sponge during wet use to remove abrasive debris and restore cutting action; replace the sponge when the abrasive surface is worn or clogged.

Usage recommendations

Use personal protective equipment such as dust mask and safety glasses for dry sanding. For wet sanding, prevent excess water contact with sensitive substrates and let the surface dry before further finishing. Store the sponge in a dry place away from direct sunlight to maintain abrasive performance.