Graphite 56H030 jigsaw/scroll saw/reciprocating saw blade 1 pc(s)

GRAPHITE 56H030 reciprocating saw blade, made of cemented carbide (HM/TCT), measures 240 x 23 x 1.5 mm and is supplied as a single piece. Designed for use with reciprocating saws and jigsaws, this blade is intended for straight cutting of cellular concrete, brick, cement board and plasterboard. With a 2 TPI (12.7 mm pitch) tooth geometry, it enables cutting of materials up to 150 mm thick while maintaining straight-line cuts and reduced burr formation.

Advantages

The HM construction provides high wear resistance and maintains cutting performance when working with abrasive materials. The blade design delivers quick, clean cuts with lower dust generation compared to diamond or corundum disc cutting methods. Its dimensions and tooth pitch allow cutting close to edges and in confined or hard-to-reach locations while preserving straight, accurate cuts.

Suitable for

• Cutting straight cellular concrete panels and aerated blocks
• Trimming and cutting small bricks and masonry up to 150 mm thick
• Cutting cement boards and plasterboard in renovation and construction
• Demolition and retrofit tasks where access is limited
• DIY home projects requiring straight, low-dust cuts

Key specifications

• Blade material: cemented carbide (HM/TCT)
• Overall dimensions: 240 x 23 x 1.5 mm
• Teeth: 2 TPI (12.7 mm pitch) for straight, aggressive cutting
• Maximum recommended cutting thickness: up to 150 mm for small bricks and similar materials
• Pack quantity: 1 piece; net weight approximately 45 g

How to use

Fit the GRAPHITE 56H030 blade to a compatible reciprocating saw or jigsaw following the tool manufacturer's instructions and secure it firmly. Select an appropriate cutting speed and feed rate for the work material; allow the blade to cut without excessive side pressure to maintain straightness and prolong blade life. For best results on cellular concrete and cement board, use steady, even strokes and avoid overheating the blade. Ensure workpiece support and stable positioning to prevent kickback and to achieve clean, accurate cuts.

Usage recommendations

Wear appropriate personal protective equipment (eye protection, dust mask, gloves). Use dust extraction or local ventilation when cutting to further reduce airborne dust. Replace the blade if cutting performance deteriorates or if visible damage occurs. Verify that the blade's dimensions and tooth type match the material and task before starting work.