Graphite 56H037 jigsaw/scroll saw/reciprocating saw blade 1 pc(s)

The Graphite 56H037 reciprocating saw blade is a single-piece, cemented carbide (HM/TCT) cutting blade designed for use with jigsaws, scroll saws and reciprocating saws. Measuring 228 x 24 x 1.25 mm with an 8 TPI (3/8" pitch), this blade is intended for demanding renovation, construction, demolition and DIY tasks where cutting speed, straight-line performance and reduced dust are important. It is suitable for a wide range of materials including metal up to 100 mm, wood (including nailed wood), cement, cellular concrete, red brick, glass fibre-reinforced composites and epoxy resin.

Advantages

The blade’s cemented carbide (HM/TCT) construction delivers long life and resistance to wear when cutting abrasive or mixed materials. Its tooth geometry and pitch provide fast, clean cuts with minimal burrs and reduced dust generation compared with traditional abrasive methods. The slim 1.25 mm thickness and compatible reciprocating shank allow cutting close to edges and enable work in confined or hard-to-reach areas.

Suitable for

• Cutting metal sections and profiles up to 100 mm
• Demolition and renovation tasks with mixed materials
• Cutting nailed wood and timber with embedded metal
• Working with cement, cellular concrete and red brick
• Cutting glass fibre-reinforced composites and epoxy resin

Key specifications

• Blade type: reciprocating/jigsaw/scroll saw blade
• Material: cemented carbide (HM/TCT)
• Dimensions: 228 x 24 x 1.25 mm
• Tooth pitch: 3/8" (approx. 8 TPI)
• Suitable thickness range for metal and composites: up to 100 mm
• Quantity: 1 piece
• Weight: 46 g

How to use

Install the blade in the compatible reciprocating saw, jigsaw or scroll saw according to the tool manufacturer’s instructions, ensuring the blade is securely fastened and oriented in the correct cutting direction. Select an appropriate speed and feed rate for the material being cut: slower feed for hard or reinforced materials and steady, controlled motion for nails or metal inclusions. Use clamps or supports to stabilize the workpiece and keep hands clear of the cutting area. After use, inspect the blade for wear or damage and replace when cutting performance declines.

Usage recommendations

For best results when cutting metal, composites or masonry, use moderate cutting speed and allow the blade to do the work to avoid overheating. Wear appropriate personal protective equipment (PPE) including eye protection, respiratory protection for dusty materials and gloves. When cutting brittle or reinforced materials, secure the workpiece and proceed in controlled passes to maintain a straight cut and reduce chipping.