Router bit GRAPHITE 56H202 — 1 pc pack

GRAPHITE 56H202 router bit, supplied as a single piece, is a double-ended end milling cutter intended for precision shaping and machining of wood, PVC, chipboard and similar materials. The cutter features sintered carbide cutting inserts on the head to deliver a smooth surface finish. The working part has a diameter of 6 mm and a cutting height of 19 mm, while the shank diameter is 8 mm. This router bit is suitable as a replacement or spare cutter for workshop and DIY routing tasks; compatibility with the router or trimmer should be checked before use.

Advantages

The double-ended design provides two cutting edges in one tool for extended service life and economical replacement. Sintered carbide inserts maintain sharpness and resist wear during machining of wood, PVC and composite boards, resulting in consistent surface quality. The compact working diameter and 19 mm cutting height enable accurate groove, profile and trimming operations while the 8 mm shank ensures secure mounting in commonly used collets.

Suitable for

• Edge profiling and trimming of wooden boards
• Grooving and slotting in particleboard and MDF
• Shaping and finishing of PVC and plastic trim
• Replacement or spare cutter for routers and trimmers in workshops

Key specifications

• Type: double-ended end milling cutter
• Cutting material: sintered carbide inserts
• Working diameter: 6 mm
• Cutting height: 19 mm
• Shank diameter: 8 mm
• Applicable materials: wood, PVC, chipboard, MDF and similar

How to use

Install the router bit into a compatible router or trimmer collet that accepts an 8 mm shank and ensure the tool is seated firmly. Set an appropriate rotation speed and feed rate for the processed material to avoid burning or tear-out; perform a test cut on a scrap piece if uncertain. Make multiple light passes rather than a single deep cut for cleaner edges and longer cutter life. After use, clean debris from the cutting inserts and store the bit in a protective holder.

Usage recommendations

Verify collet compatibility and machine speed limits before fitting the bit. Use appropriate personal protective equipment, secure the workpiece, and avoid excessive radial loads on the cutter. For best finish, use sharp inserts and adjust feed and speed according to material density.