Router bit GRAPHITE 56H227 — single pack, 42 g

GRAPHITE 56H227 router bit supplied as a single pack weighing 42 g. This shoulder milling cutter with bearing is intended for precision routing of wood, PVC, chipboard and similar materials. The cutter head uses sintered carbide (HM) inserts for durable cutting performance, and the integrated bearing enables guided profiling along workpiece edges or templates. The tool fits routers and handheld trimmers that accept a 6 mm shank and is supplied as one replacement or spare bit for general routing, edge rounding and slotting tasks.

Advantages

The cutting head is equipped with sintered carbide inserts that provide wear resistance and maintain cutting geometry during repetitive operations. An integrated bearing ensures accurate guidance and consistent results when following edges or templates. Compact dimensions (32 mm diameter, 12.9 mm cutting height, 6 mm shank) make the bit compatible with a wide range of portable routers and trimmers and suitable as a lightweight spare or replacement in workshop kits.

Suitable for

• Edge profiling and rounding on solid wood and veneered panels
• Trimming and guiding along templates or workpiece edges
• Slotting and shoulder milling in chipboard, MDF and PVC
• Hobby woodworking and small repairs that require a compact 6 mm-shank cutter

Key specifications

• Cutting head diameter: 32 mm
• Cutting height (head): 12.9 mm
• Shank diameter: 6 mm
• Cutting material: sintered carbide (HM) inserts
• Type: shoulder milling cutter with guide bearing
• Weight per unit: 42 g
• Packaging: single piece

How to use

Install the 6 mm shank securely in the router or trimmer collet and tighten according to the tool manufacturer's instructions. Check that the guide bearing spins freely and is undamaged before starting. Adjust cutting depth by raising or lowering the router carriage or setting the router base to obtain the required shoulder or rounding size. Make trial cuts on scrap material to confirm feed speed and rotation direction; feed the cutter against the rotation for safe cutting and control. Use multiple light passes rather than a single heavy cut to extend insert life and obtain a cleaner edge.

Usage recommendations

Use appropriate personal protective equipment (eye and hearing protection, dust mask) and clamp workpieces securely. Match router speed and feed rate to the workpiece material—lower speeds for plastics like PVC, moderate speeds for chipboard and higher speeds for solid wood where recommended. Replace or resharpen inserts when cutting quality deteriorates, and keep the bearing clean from dust and debris to maintain precise guidance.