Power Drill Accessory Graphite 56H703

The Graphite 56H703 power drill accessory is a mixer working part designed for heavy-duty mixing tasks. With an overall length of 230 mm and a mixing head diameter of 140 mm, this galvanized steel feeder agitator is compatible with a mandrel ref. 56H700 and intended for processing thick solutions such as mortar, concrete and adhesives that contain sand, gravel or expanded clay. Weighing 840 g, it balances robust construction with manageable handling for site and workshop use.

Advantages

The galvanized steel construction provides resistance to corrosion and mechanical wear when used with abrasive fillers. The 140 mm diameter mixing head and feeder-style geometry improve material circulation and reduce clogging when mixing dense or particulate-laden compounds. Its 230 mm length offers good reach and leverage while remaining compact enough for maneuvering in confined spaces. Designed to fit the specified mandrel, the accessory secures reliably for consistent mixing performance.

Suitable for

• Mixing mortar and cement-based screeds
• Preparing concrete batches and repair mortars
• Blending adhesives and tile adhesives containing aggregates
• Stirring plaster, grout and compound mixes with sand or lightweight aggregates
• Site and workshop mixing tasks requiring a robust feeder agitator

Key specifications

• Mixing head diameter: 140 mm
• Overall length: 230 mm
• Weight: 840 g
• Material: galvanized steel
• Designed for use with mandrel reference 56H700
• Suitable for thick mixtures containing sand, gravel or expanded clay

How to use

Attach the feeder agitator to a compatible power drill or mixing device using the specified mandrel. Secure the connection according to the drill and mandrel manufacturer’s instructions before operating. Submerge the mixing head into the material and run the drill at a moderate speed to allow the feeder geometry to draw and circulate the mix; avoid excessive speed that can cause splashing or air entrainment. Lift and move the mixer through the batch to ensure uniform consistency, and periodically check for trapped aggregates or blockages. After use, clean the agitator thoroughly to remove residues and prevent corrosion.

Usage recommendations

Use appropriate personal protective equipment such as gloves, eye protection and a dust mask when mixing cementitious or dusty materials. For best results with dense or highly filled mixtures, operate the drill at lower speeds and use steady, controlled movements to prevent overloading the motor. Store the galvanized steel accessory dry and clean to prolong service life.