Power drill accessory GRAPHITE 56H704 — length 230 mm, diameter 14 cm, weight 850 g, 1 pc

GRAPHITE 56H704 is a single-piece power drill accessory designed as a mixer working part with a length of 230 mm and a working diameter of 140 mm. Intended to be mounted on compatible drills as an attachment, this injection agitator is optimized for mixing thin solutions such as paints, gypsum plaster and structural paints. The design injects material downwards to reduce spillage and contamination while delivering stable mixing performance for small to medium batches.

Advantages

The mixer features a robust one-piece construction that ensures reliable attachment and reduces flex during operation. Its 140 mm diameter and 230 mm length provide adequate reach and effective flow for thin to medium-viscosity materials. The downward injection design minimizes splatter and keeps the work surface cleaner. Supplied as a single unit, it is simple to install and replace when used with compatible rotary tools.

Suitable for

• Mixing paints and lacquers with low to medium viscosity
• Preparing gypsum plaster and repair compounds
• Blending structural paints and textured coatings
• Small-scale site or workshop mixing tasks

Key specifications

• Length: 230 mm
• Working diameter: 140 mm
• Weight: 850 g
• Construction: single-piece injection agitator
• Flow direction: downward injection to reduce spillage
• Pack quantity: 1 piece

How to use

Secure the mixer accessory in the drill chuck according to the drill manufacturer’s instructions, ensuring a firm, concentric fit. Submerge the agitator into the container of material and run the drill at a moderate speed to begin mixing; increase speed if necessary while avoiding excessive splashing. For best results with thin paints and plasters, move the mixer slowly through the mixture to achieve uniform consistency. After use, stop the drill, withdraw the agitator from the material and clean it promptly to prevent material buildup.

Usage recommendations

Use personal protective equipment such as gloves and eye protection when mixing chemicals or dusty compounds. Match drill speed and torque to the material viscosity to avoid overloading the drill or causing excessive splatter. Clean the mixer immediately after each use and inspect for wear before reusing to maintain efficient mixing performance.