Metalworking chisel GRAPHITE 57H555, weight 260 g, single piece

GRAPHITE 57H555 metalworking chisel, single piece, is a plain SDS‑Plus chisel designed for manual and powered striking where a compact, durable cutting and breaking tool is required. The tool weighs 260 g and is 250 mm long with a 40 mm thick blade profile. Self‑sharpening action and high strength construction provide prolonged service life and reduce downtime for resharpening.

Advantages

The chisel combines an SDS‑Plus connection with a plain blade profile suitable for both vertical and horizontal breaking. Self‑sharpening action maintains cutting performance through use, while a robust design minimises jamming in material. The single‑piece construction delivers consistent strength and reliability for repeated striking in building and renovation tasks.

Suitable for

• Cutting and breaking of bricks, hollow blocks and loose stone
• Chasing cable furrows in walls during renovation and conversion
• General demolition and tile striking in indoor renovation
• Concrete cutting and localized removal where a compact chisel is needed

Key specifications

• Connection type: SDS‑Plus
• Blade type: plain chisel
• Action: self‑sharpening
• Thickness: 40 mm
• Length: 250 mm
• Weight: 260 g
• Packaging: polybag on hanger with sticker (single piece)

How to use

Install the chisel into an SDS‑Plus compatible rotary hammer or breaker following the tool manufacturer's instructions and secure it in the chuck. Position the chisel against the work surface at the desired angle for cutting or breaking and apply controlled striking action. For chasing or fine removal, use shorter, measured blows; for general demolition use heavier blows while keeping the chisel aligned to avoid bending. Always allow the tool to do the work rather than forcing it.

Usage recommendations

Use appropriate personal protective equipment, including eye protection, hearing protection and gloves. Ensure the power tool is switched off and disconnected when changing the chisel. For best performance on concrete and masonry, maintain correct alignment and avoid excessive lateral bending stresses. Store the chisel dry and inspect for damage before use.