Circular Saw Blade GRAPHITE 200 x 30 x 3.2 mm, 60 teeth (57H678)

GRAPHITE 200 x 30 x 3.2 mm circular saw blade with 60 teeth is designed for fine, precise cutting in wood and wood-based materials. The blade's 200 mm diameter and 30 mm bore suit table saws and miter saws with a 30 mm arbor. With a 3.2 mm plate thickness and a high tooth count, the blade is intended to deliver clean crosscuts and finishing cuts that require smooth edges and minimal tear-out.

Advantages

The 60-tooth geometry provides a balance between cutting speed and surface quality, producing cleaner finishes than coarse-tooth blades. A 3.2 mm plate thickness adds stability during cuts, reducing vibration and improving accuracy on both stationary table saws and miter saws. The 30 mm bore ensures compatibility with common arbor sizes, and the blade construction is optimized for wood and wood-based panels, enabling reliable performance for precision joinery and finishing tasks.

Suitable for

• Crosscutting softwood and hardwood
• Fine finishing cuts on plywood, MDF and laminated boards
• Precision joinery and furniture components
• Mitre cuts and small-panel trimming on table saws or miter saws with 30 mm arbor

Key specifications

• Diameter: 200 mm
• Bore (arbor) diameter: 30 mm
• Plate thickness: 3.2 mm
• Number of teeth: 60
• Material compatibility: wood and wood-based materials (plywood, MDF, laminated boards)

How to use

Install the blade on a compatible saw with a 30 mm arbor, following the saw manufacturer's instructions and observing correct blade rotation direction. Ensure the saw is powered off and disconnected before mounting. Tighten the arbor flange securely and check blade alignment and runout before making cuts. Use appropriate feed rates and steady motion for crosscuts and finishing cuts to achieve smooth edges. Always use a suitable saw splitter or riving knife and hold-down or fence guidance for accurate, safe cutting.

Usage recommendations

Wear appropriate personal protective equipment, including eye and hearing protection and a dust mask. Use blades with the correct RPM rating for your saw and inspect the blade for damage or dulling before use. For the best finish on laminated or veneered panels, consider scoring the cut line or using a zero-clearance insert to reduce chipping. Store the blade in a dry place and keep it clean from resin and pitch to maintain cutting performance.