Diamond Cutting Disc 200 x 25.4 mm Full GRAPHITE 57H874

GRAPHITE Diamond Cutting Disc 200 x 25.4 mm Full is a continuous-rim diamond blade designed for precision cutting of hard construction and finishing materials. With a 200 mm outer diameter and a 25.4 mm bore, this disc provides stable mounting and consistent cutting depth on compatible angle grinders and tile saws. The full (continuous) rim construction is intended to deliver smooth, chip-free cuts on ceramics, porcelain, natural stone and similar dense materials, and it can be used in wet or dry cutting arrangements where the machine and material allow.

Advantages

The continuous diamond rim minimizes chipping and produces an even cut edge suitable for finishing work. The design ensures uniform material removal and improved control during straight-line cuts. Compatibility with both wet and dry cutting setups increases versatility across workshop and site applications. The 25.4 mm bore ensures firm fitting on standard flanges for stable operation and reduced vibration.

Suitable for

• Ceramic and porcelain tiles
• Natural stone such as marble and granite
• Cutting dense masonry and concrete elements (finishing cuts)
• Tile finishing, trimming and precise edge work

Key specifications

• Diameter: 200 mm
• Bore (mounting hole): 25.4 mm
• Rim type: continuous (full) diamond rim for smooth cuts
• Compatible cutting modes: wet and dry where permitted by the tool and material
• Main materials: ceramics, porcelain, natural stone, dense masonry

How to use

Install the disc on a compatible angle grinder or tile saw with matching arbor size, ensuring the disc is correctly seated and tightened according to the tool manufacturer’s instructions. When cutting, secure the workpiece, mark the cut line, and make steady, controlled passes without applying excessive force. Use wet cutting when possible to extend disc life and reduce dust; if dry cutting, follow recommended duty cycles and allow cooling breaks to avoid overheating. Wear appropriate personal protective equipment including eye, hearing and respiratory protection.

Usage recommendations

For the best edge quality on ceramics and natural stone, use a wet cutting setup and maintain a steady feed rate. Check that the disc is suitable for the specific material and thickness before starting and replace the disc if signs of wear or uneven cutting appear.