In cart {{totalProductsCount}} item(s)
Your cart is empty
Hole saw GRAPHITE 57H913 — single pack, 288 g
Cheapest with
Latvijas Pasts pakomāts
Latvijas Pasts pakomāts
1.99 €
{{selectedOffer.parcelStationDeliveryString}}
You saving {{productBundleYouSave | formatAmount}}
GRAPHITE 57H913 hole saw — single pack weighing 288 g — is a bimetal hole cutter with progressive teeth made of high speed steel. It is designed to produce clean, circular holes in a variety of materials including steel, stainless steel, wood, plastics and composite materials. The tool is supplied as a single unit for use with standard hand-held drills and drill drivers in repair, plumbing, electrical and carpentry tasks.
The bimetal construction combines flexibility and wear resistance to extend tool life while progressive high-speed steel teeth improve cutting speed and reduce vibration. The design produces precise hole diameters with a reduced risk of material tearing or burr formation. Lightweight single-pack configuration makes the hole saw easy to handle, store and transport for on-site work.
Secure the hole saw to a compatible arbour or mandrel and tighten according to the drill manufacturer’s instructions. Mark the centre of the desired hole on the workpiece and start drilling at low speed to establish a pilot position, then increase speed and apply steady, even pressure. Use cutting lubricant when working with metals to reduce heat buildup and prolong the life of the teeth. After cutting, remove burrs and inspect the hole for the required finish.
For best results when cutting metal or stainless steel, use a suitable cutting oil, maintain moderate drilling speed and avoid excessive side pressure. When working with wood or plastics, select a lower speed to prevent melting or splintering. Regularly inspect the teeth for wear and replace the hole saw when cutting quality deteriorates.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}
