Rotary hammer GRAPHITE 58G537, 3.15 kg, depth 360 mm

GRAPHITE 58G537 is a four-function SDS+ rotary hammer designed for drilling and light chiselling in concrete, masonry and similar materials. With a rated power of 710 W and a maximum impact energy of 2.6 J, this compact 3.15 kg tool combines drilling, impact drilling, chiselling (shoring) and a stepless adjustable chisel angle to deliver precise results in construction, renovation and installation tasks. The tool accepts SDS+ bits and is supplied as a set that includes an extra drill bit, a drill chuck, a chuck adapter and a practical carrying case.

Advantages

The rotary hammer offers high drilling performance with a maximum drilling diameter of up to 24 mm in concrete, up to 13 mm in steel and up to 30 mm in wood. A maximum stroke frequency of 5,500 min-¹ and a maximum no-load speed of 1,350 min-¹ ensure efficient material removal and faster progress on jobs. The device features a reversible spindle with maintained power in left rotation and a switch lock for continuous operation. A 3 m rubber-coated cable provides flexibility and durability for both indoor and outdoor work. CE certification confirms compliance with applicable European safety standards.

Suitable for

• Drilling holes in concrete and masonry for anchors or dowels
• Light chiselling and removal of plaster or tile adhesive
• Drilling metal and wood in installation or assembly tasks
• Use on construction and renovation sites where a portable SDS+ hammer is required

Key specifications

• Power: 710 W
• Maximum impact energy: 2.6 J
• Maximum drilling diameter: concrete up to 24 mm, steel up to 13 mm, wood up to 30 mm
• Maximum stroke frequency at nominal speed: 5,500 min-¹
• Maximum no-load speed: 1,350 min-¹
• Functions: drilling, impact drilling, chiselling (shoring), stepless chisel angle adjustment
• Weight: 3.15 kg
• Cable length: 3 m, rubber-coated
• Chuck system: SDS+

How to use

Fit an appropriate SDS+ bit or the supplied drill bit and secure any additional chuck or adapter when using conventional bits. Select the required mode (non-impact drilling, impact drilling or chiselling) and set the chisel angle using the stepless adjustment for precise positioning of the shoe. Use the reversible rotation control to change drilling direction without loss of power and engage the switch lock for continuous operation when required. Apply steady pressure without forcing the tool; allow the hammer action to do the work. Disconnect the tool from the power supply before changing accessories or performing maintenance.

Usage recommendations

For best results when drilling concrete, start with a smaller diameter pilot hole if necessary and use correct SDS+ masonry bits. Wear appropriate personal protective equipment — eye protection, hearing protection and dust mask — and secure the workpiece. Keep the cable clear of the working area and inspect the cord for damage before use. Store the tool and accessories in the supplied carrying case to protect them from damage and moisture.