Mixer GRAPHITE 58G782-96 — mixing paddle 590 x 120 mm, M14 thread

GRAPHITE 58G782-96 mixing paddle is a dedicated accessory for power drills and electric mixers. The paddle measures 590 x 120 mm and is fitted with an M14 threaded shank for secure attachment to compatible tools. It is intended for stirring and homogenizing paints, adhesives, plasters and other medium- to high-viscosity materials used in renovation and construction work. The paddle profile and overall length are designed to improve mixing efficiency while reducing splatter and air entrapment.

Advantages

The construction delivers stable performance during prolonged mixing tasks and the M14 threaded shank ensures reliable connection with standard mixer chucks. Its 590 mm length reaches deep into buckets and containers, promoting uniform blending across the full volume. The paddle width and shape reduce splashing and help maintain a steady vortex for even material dispersion. Materials and manufacturing ensure durability under typical jobsite conditions.

Suitable for

• Mixing water-based and solvent-based paints
• Preparing tile adhesives and cement-based mortars
• Blending gypsum plasters and joint compounds
• Mixing sealants, resins and epoxy compounds at low to medium viscosity

Key specifications

• Paddle length: 590 mm
• Paddle width: 120 mm
• Shank type: threaded M14
• Intended use: mixing viscous liquids and pastes
• Compatibility: designed for power drills and electric mixers with M14 connection

How to use

Secure the M14 threaded shank into the mixer or drill chuck and tighten according to the tool manufacturer’s instructions. Insert the paddle into the material container so the lower part is fully submerged before starting the tool. Run the mixer at a low speed initially to avoid splashing, then increase speed as needed to achieve a homogeneous mixture. Periodically lift the paddle slightly and allow material to settle if excessive air is introduced. Clean the paddle after each use to prevent material buildup and ensure long service life.

Usage recommendations

Use a drill or mixer with adequate torque and speed control; avoid sustained high speed with thick pastes. When mixing chemical or solvent-based materials, work in a well-ventilated area and follow the safety instructions of the mixed products. Inspect the threaded shank and paddle for wear before each use and replace if bent or damaged.