Vacuum Graphite 58GE124

Energy+ 18 V wet and dry workshop vacuum cleaner with a 20 l steel tank and brushless motor. The device operates on the Energy+ battery system and is compatible with 18 V lithium‑ion batteries at 2 Ah and 4 Ah capacities; recommended battery capacity is 4 Ah (approximate operating time 21 minutes). The vacuum is designed for both dry and wet cleaning, offers a 60 W suction power, 14 l/s air flow and 16 kPa vacuum level. It includes a blower function to clear leaves and debris, a HEPA‑type filter plus a sponge filter, practical wheels, telescopic tube and a transport handle. The unit is intended for home and outdoor cleaning tasks and is not intended for industrial use. The workshop vacuum is supplied without a battery.

Advantages

The brushless motor provides efficient operation and longer motor lifetime. Cordless design based on the Energy+ battery system enables portable use without trailing power cables. A 20‑litre steel tank offers a balance between capacity and portability. Built‑in blower function increases versatility for outdoor cleaning. Filtration combines a HEPA‑type filter and a sponge filter to capture fine dust and larger debris. Lightweight construction and wheels make the device easy to move and store.

Suitable for

• Dry indoor cleaning of floors, workbenches and small workshops
• Wet cleaning of spills and damp surfaces
• Outdoor clearing of leaves, needles and grass clippings using the blower
• Cleaning basements, garages, paths and terraces

Key specifications

• Power source: 18 V lithium‑ion battery (Energy+ system)
• Recommended battery capacities: 2 Ah (approx. 10 min), 4 Ah (approx. 21 min)
• Motor type: brushless
• Suction power: 60 W
• Tank capacity: 20 litres (steel)
• Air flow: 14 l/s
• Vacuum (suction): 16 kPa
• Hose tip diameter: 32 mm
• Included filters: HEPA‑type filter and sponge filter
• Weight: approximately 4.2 kg
• Features: blower function, telescopic tube, wheels, transport handle

How to use

Fit a compatible 18 V Energy+ battery (not included) into the tool compartment before use. Select dry or wet mode according to the surface and ensure the appropriate filter and waste collection method are fitted. Connect the telescopic tube and the appropriate nozzle (work brush, crevice nozzle or standard suction end) and switch the unit on. For blower use, attach the hose or outlet as instructed and operate the blower to move leaves or debris. Empty the 20 l tank and clean or replace filters after use, especially following wet cleaning, and store the vacuum in a dry place.

Usage recommendations

Use the 4 Ah Energy+ battery for longer run time. Do not use the device for continuous industrial tasks. After wet use, empty and dry the tank and rinse or replace the sponge filter to prevent mold. Replace the HEPA‑type filter according to contamination level to maintain suction performance.