Circular saw blade GRAPHITE 235 x 30 mm, 60 teeth

GRAPHITE circular saw blade 235 x 30 mm with 60 teeth is designed for precise cutting of solid wood and wood-based panels. With a 235 mm diameter and a 30 mm arbor hole, the blade delivers finer, smoother cuts and reduced tear-out compared with coarse-tooth alternatives. It is intended for use in compatible table saws, miter saws and handheld circular saws that accept a 30 mm bore blade.

Advantages

The 60-tooth configuration provides a higher tooth density that produces cleaner edges and a better surface finish on cuts. Its 235 mm diameter balances cutting depth and stability for common woodworking tasks. The standardized 30 mm arbor enables straightforward mounting on machines with matching fittings. The blade geometry reduces splintering on laminates and veneered boards while maintaining efficient material removal when used at recommended feed rates.

Suitable for

• Crosscuts and rip cuts in solid wood where a fine finish is required
• Cutting plywood, MDF and laminated panels with reduced tear-out
• Precision joinery and finishing work on table saws and miter saws
• Stationary and portable circular saws with a 30 mm arbor

Key specifications

• Diameter: 235 mm
• Arbor bore: 30 mm
• Tooth count: 60 teeth
• Material compatibility: wood and wood-based materials
• Cut quality: fine/smooth finish with reduced tear-out

How to use

Install the blade on a machine with a compatible 30 mm arbor, ensuring the blade rotation direction matches the saw's arrow marking. Tighten the arbor flange to the manufacturer's torque specification and check that blade runout is within acceptable limits before operation. Adjust saw speed and feed rate according to material thickness and type to achieve the best finish; use support fences or guides for straight cuts and a push stick or push block for safe handling on table saws.

Usage recommendations

Inspect the blade for damage before each use and replace it when teeth become dull or chipped to maintain cut quality. For veneered or laminated surfaces, score the cut line if necessary or use an auxiliary splinter guard to minimize edge tear-out. Use appropriate personal protective equipment, secure the workpiece, and follow the saw manufacturer's safety instructions.