Planer Blade GRAPHITE 59G680-30 replacement blade for wood planers, graphite-coated cutting edge

Replacement planer blade GRAPHITE 59G680-30 is a spare cutting element intended for compatible wood planers. The blade features a precision-ground cutting edge and a graphite coating that reduces friction during cutting and improves chip evacuation. It is designed for smoothing and thicknessing timber surfaces in carpentry, joinery and general woodworking tasks where a sharp and wear-resistant blade is required.

Advantages

The graphite-coated cutting edge lowers friction between blade and wood, which helps to reduce heat build-up and minimize resin or pitch adhesion. Precision grinding ensures a consistent cutting geometry for clean shavings and reduced tear-out on a variety of wood species. The blade is manufactured to fit common planer blade holders, providing a straightforward replacement that restores cutting performance without needing special adjustments in most machines.

Suitable for

• Smoothing rough-sawn boards and planing faces
• Thicknessing timber to uniform dimensions
• General carpentry and joinery finishing work
• Replacing worn or nicked blades in compatible wood planers

Key specifications

• Cutting edge: precision-ground with graphite coating for reduced friction
• Intended use: surface smoothing and thicknessing of timber
• Material: hardened tool steel blade (graphite-coated cutting surface)
• Finish: graphite coating on cutting edge to improve chip flow
• Compatibility: designed for use in compatible bench and portable wood planers

How to use

Ensure the planer is disconnected from power before replacing the blade. Remove the planer’s blade holder or drum according to the machine manufacturer’s instructions, taking care to retain any clamping hardware. Install the replacement blade with the cutting edge oriented correctly and aligned to the specified projection and angle for your planer model. Tighten the clamping screws to the recommended torque and rotate the cutting head by hand to confirm there is no contact with the housing. Reconnect power and perform a test cut on a scrap piece of wood, making small adjustments to blade height or infeed settings as needed to achieve the desired cut depth and surface finish.

Usage recommendations

For prolonged blade life and consistent results, sharpen or replace blades when nicking or dulling is evident, use appropriate feed rates and avoid excessive depth of cut. Store spare blades in a dry environment and handle the cutting edge with care to prevent damage or injury.