Mitre Saw Stand Graphite 59G823 Aluminium 4 Legs Black Grey

Table saw 1600 W, 254/30 mm, folding table 59G823 by GRAPHITE is supplied with a folding aluminium table and a four-leg stand that provides a stable base for cutting operations. The saw delivers a rated power of 1600 W (S1) and a higher short-time power of 2000 W (S6 20%), uses a 254 mm diameter blade with 30 mm bore and reaches up to 4800 rpm. Adjustable cutting angles include a bevel range from 0 to 45° and a maximum main cut depth of 80 mm (at 90°) or 55 mm (at 45°). The folding table dimensions are approximately 560 x 670–1040 x 1000 mm. Safety and dust control are addressed by a movable blade guard and a chip extractor. The saw includes an adjustable riving knife and a parallel fence, and is supplied with tripod, shoulder support, tripod handle, auxiliary handle, mounting screws and spanners. Net weight of the machine is 31 kg.

Advantages

The unit combines a powerful motor with a compact 254 mm blade for versatile cutting tasks, while the folding aluminium table and four-leg stand improve portability and stability on site. Adjustable bevel and cut-depth settings allow for precise angle and depth control. Integrated safety features such as the movable blade guard and riving knife reduce the risk of kickback, and the chip extractor helps keep the work area cleaner. Supplied accessories allow immediate assembly and use.

Suitable for

• Crosscuts and mitre cuts in timber and board materials
• On-site carpentry and joinery tasks
• DIY renovation and furniture-making projects
• Work requiring a portable but stable saw setup

Key specifications

• Motor power: 1600 W (continuous), 2000 W (short-time)
• Blade diameter: 254 mm; bore: 30 mm
• No-load speed: 4800 rpm
• Bevel cutting range: 0–45°
• Maximum cutting depth: 80 mm at 90°, 55 mm at 45°
• Folding table dimensions (approx.): 560 x 670–1040 x 1000 mm
• Stand: folding aluminium table with four legs
• Net weight: 31 kg

How to use

Place the folding aluminium table on a stable surface and unfold the four-leg stand until it locks. Fit the saw to the stand and secure it using the supplied mounting screws and spanners. Install the provided blade if not already fitted, adjust the parallel fence and riving knife for the intended cut, and set the bevel angle and cutting depth as required. Connect the saw to a suitable power supply and start the motor; make cuts with steady feed, keeping hands clear of the blade and using the movable blade guard. Use the chip extractor connection to minimise dust during operation.

Usage recommendations

Use appropriate personal protective equipment (eye, ear and respiratory protection) and follow local safety regulations. Ensure the saw is disconnected from power before making adjustments or changing the blade. For longer service life and consistent performance, clean chips from the extractor port and check fastenings regularly.