Cutting Disc for Metal GRAPHITE Razor Cut Plus INOX A60X-BF — 125 mm x 1.0 mm

GRAPHITE Razor Cut Plus INOX A60X-BF cutting disc, 125 mm x 1.0 mm, is a thin, high-precision wheel designed for cutting metal and stainless steel (INOX) with minimal material loss. The 1.0 mm thickness enables narrow kerf cuts for accurate separation of sheet metal, profiles, pipes and other metal workpieces. This disc is intended for use on angle grinders with a 125 mm wheel size and compatible flanges; the abrasive composition and bond are selected to provide controlled cutting performance on ferrous and stainless steels.

Advantages

The thin 1.0 mm kerf reduces waste and limits heat build-up during cutting, improving edge quality and reducing the need for secondary finishing. The A60X abrasive grade and bond combination deliver balanced cutting speed and wheel life for light to medium metalworking tasks. The disc's design aims to offer stable rotation and predictable wear when mounted correctly on a matching 125 mm angle grinder.

Suitable for

• Cutting stainless steel sheets and plates
• Separating steel profiles, rods and pipes
• Sheet metal trimming and fabrication
• Light construction and maintenance metal cutting

Key specifications

• Wheel diameter: 125 mm
• Thickness (kerf): 1.0 mm
• Abrasive grade: A60X (suitable for ferrous and stainless steels)
• Center hole diameter: fits standard 22.23 mm (7/8") flanges for 125 mm angle grinders
• Intended use: cutting (not for grinding or flap operations)
• Maximum rotational speed: follow angle grinder rating and disc marking

How to use

Install the disc on a compatible 125 mm angle grinder using the correct flanges and tighten according to the tool manufacturer's instructions. Verify the disc is not damaged before use and wear appropriate personal protective equipment, including eye and hearing protection, gloves and protective clothing. Align the disc with the cut line, apply steady controlled pressure and let the abrasive do the work; avoid excessive side pressure or twisting motions. After cutting, allow the disc to stop completely before setting the tool down and inspect workpiece edges for required finishing.

Usage recommendations

Use this cutting disc on materials and thicknesses appropriate for a 1.0 mm kerf and A60X abrasive; for thicker sections or heavy-duty tasks choose a disc with greater thickness or a different abrasive grade. Always follow angle grinder speed limits and safety instructions printed on the disc and the power tool.