Staples pack GRAPHITE 56H754 — 52 g, 1 pc

GRAPHITE 56H754 staples pack contains a single compact pack intended as replacement consumables for compatible stapling tools. The pack weight is 52 g and it serves for fastening paper, light cardboard and similar materials in office or household tasks. These GA18 type staples are made of galvanised steel and designed for general-purpose stapling where corrosion resistance and mechanical durability are required.

Advantages

These staples offer increased resistance to mechanical damage and corrosion thanks to their galvanised steel construction. The GA18 design and 32 mm leg length provide reliable penetration for thicker materials such as light cardboard or upholstery layers, while the 5.8 mm working part width ensures consistent closure. The compact single-pack format is suitable for occasional use or as emergency replacement stock.

Suitable for

• Office stapling of paper and light cardboard
• Household quick repairs and fastening tasks
• Carpentry, upholstery and light construction fastening
• Use with compatible manual and battery-powered staplers (including 2in1 Energy+ 18 V Li-ion models)

Key specifications

• Type: GA18 staples
• Staple leg length: 32 mm
• Working part width: 5.8 mm
• Material: galvanised steel (increased corrosion resistance)
• Quantity in typical full strip: 400 pcs (pack contains 1 piece of the pack described)
• Pack weight: 52 g

How to use

Load the staples into a compatible stapler following the stapler manufacturer’s instructions. Ensure the stapler model supports GA18 staples with 32 mm leg length and a 5.8 mm crown width. Position the materials to be fastened, align the stapler over the intended fastening point and press or trigger the stapler to drive the staple legs through the material and fold them under. For battery-powered staplers, confirm the battery is charged and the tool is set to the appropriate mode for the material thickness.

Usage recommendations

For optimum results, select a stapler setting and driving force appropriate to the material thickness. Store the pack in a dry place to preserve the galvanised coating and avoid prolonged exposure to moisture. When using for upholstery or carpentry, test on scrap material to verify proper staple clinch and adjust tool settings if necessary.