Rotary Tool Graphite 58GE107

The GRAPHITE Rotary Tool 58GE107 is a compact, cordless mini-grinder designed for grinding, sanding, polishing, cutting and light drilling tasks. With an overall length of 130 mm and a weight of approximately 1.1 kg, the tool is easy to handle and suitable for precision work. It is part of the Energy+ 18V system and is compatible with GRAPHITE 18 V lithium-ion batteries (battery not included). The metal spindle and 3.2 mm chuck accept a wide range of accessories; the flexible shaft is 1 m long for improved access in tight spaces. The kit is supplied with up to 40 practical accessories and a transport box for convenient storage and mobility.

Advantages

The cordless design within the Energy+ system removes the need for a permanent mains connection and allows interchangeable use with other tools that use the same 18 V batteries. Variable speed control from 5,000 to 33,000 rpm enables delicate finishing as well as more aggressive material removal. The compact, pencil-style ergonomic housing and four rubber shock-absorbing pads improve grip and reduce hand vibration. An integrated compartment for accessories and a 1 m flexible shaft increase versatility and convenience for detailed tasks.

Suitable for

• Grinding and deburring of metal, plastic and wood
• Sanding and surface finishing of small parts
• Polishing of metal and composite surfaces
• Cutting thin sheets, small pipes and rivets
• Light drilling and precision engraving

Key specifications

• Power system: 18 V lithium-ion (battery sold separately)
• Variable speed range: 5,000–33,000 rpm
• Spindle diameter / chuck capacity: 3.2 mm
• Flexible shaft length: 1 m
• Overall tool length: 130 mm
• Tool weight: approximately 1.1 kg
• Included accessories: up to 40 pieces (cutting discs, sandpaper, sanding discs, mandrels, felt wheels, wire brush, drill bits, polishing compound, wrench, etc.)
• Anti-slip handle and four rubber cushioning pads for improved stability
• Compact, pencil-style ergonomic design with accessory storage compartment

How to use

Fit a compatible GRAPHITE 18 V battery into the tool according to the manufacturer's instructions and select an accessory matching the intended operation. Secure the chosen accessory in the 3.2 mm chuck and set the speed between 5,000 and 33,000 rpm depending on material and task: lower speeds for polishing and delicate work, higher speeds for cutting and aggressive grinding. Use the flexible shaft when greater reach or precision is required. Keep a steady grip on the anti-slip handle and allow the tool to reach operating speed before engaging the workpiece. After use, switch the tool off, wait for moving parts to stop, remove the accessory and store both tool and accessories in the transport box.

Usage recommendations

For extended runtime and consistent performance, use 18 V Graphite batteries with the recommended capacity of 4 Ah; a 2 Ah battery delivers shorter operating time. Select accessory type and speed to match the material: use finer abrasives and lower rpm for finishing, coarser abrasives and higher rpm for material removal. Wear appropriate personal protective equipment such as safety glasses, gloves and dust mask, and secure the workpiece before starting. Regularly check accessories for wear and replace damaged items to maintain safe operation.