Angle Grinder Accessory Graphite 55H697 Weight 92 g

Cutting disc GRAPHITE (model 55H697) with an outside diameter of 115 mm and a bore of 22.2 mm. The cutting edges are coated with tungsten carbide, which provides effective cutting performance on a range of softer construction and DIY materials. The disc is intended for use with angle grinders and is lightweight at approximately 92 g, compatible with many common grinder models that accept a 22.2 mm arbor.

Advantages

The tungsten carbide coating increases durability and cutting precision compared with plain abrasive discs. Its 115 mm diameter offers a balance between maneuverability and cutting depth, while the 22.2 mm bore ensures compatibility with standard angle grinders. The disc’s low weight makes it easy to handle during extended tasks.

Suitable for

• Cutting wood and wooden boards
• Cutting chipboard and plasterboard
• Cutting soft brick and masonry
• Cutting plastics

Key specifications

• Brand: GRAPHITE
• Model / MPN: 55H697 (V31AC-TOP-55H697)
• Outside diameter: 115 mm
• Bore (inner diameter): 22.2 mm
• Coating: tungsten carbide
• Weight: approx. 92 g
• EAN: 5902062507013

How to use

Fit the disc to an angle grinder with a 22.2 mm arbor following the grinder manufacturer’s instructions. Ensure the disc is properly secured by tightening the flange or nut and check that the rotation direction matches any arrow on the disc. Use appropriate speed and light pressure when cutting soft materials such as wood, chipboard, plasterboard, plastic or soft brick. Always allow the disc to reach full speed before contacting the workpiece and avoid forcing the tool to prevent overheating or premature wear.

Usage recommendations

Use appropriate personal protective equipment (eye and hearing protection, gloves, dust mask) and secure the workpiece before cutting. Do not use this disc on metal or hardened materials. Inspect the disc for damage before use and replace if cracked or excessively worn. Follow the angle grinder’s safety instructions and recommended maximum RPM for a 115 mm cutting disc.