Ignitor GTV OS-STA422-00 — for 4–22W fluorescent lamps, 230V AC

GTV OS-STA422-00 is an ignitor designed for fluorescent lamps rated 4–22 W and operating from 230 V AC. It provides the starting pulses required for rapid ignition and stable operation of low-wattage fluorescent tubes. The unit is compatible with fixtures that use conventional starters and can be used both in retrofit projects and new installations where reliable lamp starting is needed.

Advantages

The ignitor delivers consistent starting pulses tailored for 4–22 W fluorescent lamps, reducing flicker at switch-on and improving lamp life by ensuring correct ignition conditions. Its compact form factor enables installation in standard luminaires with minimal adjustments. Designed to operate from a 230 V AC mains supply, the component is suitable for a wide range of household and commercial lighting applications that rely on conventional starter circuits.

Suitable for

• Starting low-wattage (4–22 W) fluorescent tube lamps
• Retrofit of luminaires that originally used conventional starters
• New installations employing starter-based fluorescent circuits
• Domestic and commercial fixtures operating from 230 V AC

Key specifications

• Compatible lamp power range: 4–22 W
• Operating voltage: 230 V AC
• Function: provides ignition pulses for rapid lamp start
• Application: for starter-based fluorescent circuits and fixtures
• Design: compact module suitable for installation in standard starter housings or designated ignitor compartments

How to use

Install the ignitor in place of a conventional starter or in the designated ignitor slot according to the luminaire manufacturer’s instructions. Ensure power is disconnected before beginning installation. After mounting, restore mains power and operate the switch to verify that the fluorescent tube starts reliably and without prolonged flicker. If necessary, check wiring continuity and lamp condition to exclude other causes of starting problems.

Usage recommendations

Use the ignitor only with fluorescent lamps within the specified 4–22 W range and in fixtures rated for 230 V AC. For safe installation, follow existing wiring standards and the luminaire manufacturer’s guidance. Replace the ignitor if irregular starting or continuous flicker persists after verifying lamp condition and correct wiring.