Level controller H-TRONIC 1114455 — cable length 10.00 m

Level controller H-TRONIC 1114455 — cable length 10.00 m is a compact device for monitoring and controlling liquid levels in tanks, sumps and pump installations. The unit is supplied with a 10.00 m cable terminated for connection to pumps or control circuits. It detects liquid presence and changes output state to enable automatic switching of pumps or signaling devices, supporting reliable level management in domestic and light industrial environments.

Advantages

The H-TRONIC level controller offers a simple installation process and low maintenance requirements due to its robust sensor design and long cable. Its straightforward switching function provides consistent level detection and integration with existing pump systems. The 10.00 m cable allows flexible sensor placement, reducing the need for additional wiring, and the device's construction is intended for repeated on/off control in standard residential and light industrial applications.

Suitable for

• Automatic switching of submersible or surface pumps in wells, sumps and cisterns
• Liquid level monitoring in domestic water tanks and rainwater harvesting systems
• Overflow prevention and dry-running protection in small pump installations
• Integration with simple control circuits and alarm inputs in light industrial setups

Key specifications

• Cable length: 10.00 m for flexible sensor placement
• Function: level detection with switching output for pump control or signaling
• Application environment: suitable for domestic and light industrial use
• Mounting: suitable for submersible or fixed-position installation depending on system design
• Maintenance: low maintenance with durable sensor construction

How to use

Install the sensor end of the controller at the required depth inside the tank or sump, routing the 10.00 m cable to the pump or control panel entry point. Connect the wiring according to the pump or controller manufacturer’s wiring diagram so that the level controller output actuates the pump start/stop or triggers an alarm. Ensure electrical connections are made with power disconnected and follow local electrical codes. Test the switching action by filling and draining the vessel to confirm reliable activation at the desired level.

Usage recommendations

For correct operation, avoid placing the sensor close to inlet flows or turbulence that may cause false switching. Periodically inspect the cable and sensor for damage and clean if deposits accumulate. Use appropriate cable routing and strain relief to prevent mechanical stress on the connections. For installations exposed to aggressive fluids or extreme conditions, consult technical guidance to confirm material compatibility.