Liquid leak detector H-Tronic 1114465

The H-Tronic liquid leak detector 1114465 is a compact AC-powered sensor designed to detect the presence of liquids in basements, utility rooms, beneath appliances, and other indoor locations. The unit features a 10 m sensor cable and a durable plastic housing with slim dimensions (29 mm × 8 mm × 74 mm), enabling discreet installation in tight spaces and along walls or pipes. It provides early detection of water or conductive liquid to help limit damage and facilitate timely maintenance.

Advantages

Its small footprint and lightweight plastic construction make the detector easy to position where leaks are most likely to occur. The 10 m sensor cable increases coverage area while allowing the main unit to be mounted away from wet zones. Operation from AC mains ensures continuous monitoring without the need for battery replacement. The device’s simple design supports straightforward installation and low-maintenance use.

Suitable for

• Monitoring basements and cellars for groundwater ingress
• Placement under washing machines, dishwashers and water heaters
• Detection around plumbing fittings, valves, and pipe runs
• Protection of electrical cabinets and server racks from accidental spills
• Use in utility rooms, boiler rooms, and cold storage areas

Key specifications

• Sensor cable length: 10 m
• Power supply: AC mains operation
• Housing material: durable plastic
• Dimensions: 29 mm (W) × 8 mm (D) × 74 mm (H)
• Mounting: compact form factor suitable for surface placement or discreet mounting

How to use

Position the sensor cable along the area to be monitored, such as along a floor edge, under appliances, or beside pipes. Place the detector housing in a dry, accessible location where it can be connected to the AC supply. Ensure the sensing cable makes contact with the floor or potential leak points. After connecting to the mains, verify the unit’s functionality following the manufacturer’s basic check procedure (observe indicator or audible signal if present). Regular visual checks of the cable and housing are recommended to confirm there is no physical damage or obstructions.

Usage recommendations

Install the sensor cable so it follows likely leak paths and low points where water would collect. Avoid running the cable across areas with heavy foot traffic or sharp edges that could damage the insulation. For reliable long-term performance, periodically inspect the sensor cable and the plastic housing, and keep the mains connection dry and secure. When used in technical rooms or near electrical equipment, comply with local safety regulations and, if necessary, consult a qualified electrician for installation.