Paint for metal HAMMERITE Hammered Effect brown 0.7 L

HAMMERITE Hammered Effect paint in brown (0.7 L) is a solvent-borne coating formulated for direct application to prepared metal surfaces. It provides a textured metallic finish that both decorates and protects metal items from corrosion. The product is intended for use on a variety of ferrous metal substrates such as gates, railings, fences and metal furniture, delivering an even, hammered-look surface without the need for primer on properly prepared metal.

Advantages

The paint combines protective properties with a decorative hammered finish that helps to conceal minor surface imperfections. Its formulation offers corrosion resistance suitable for indoor and outdoor metal applications and provides good coverage in a single coat when applied according to instructions. The brown hammered texture reduces the visibility of scratches and unevenness while delivering a consistent metallic appearance.

Suitable for

• Exterior and interior metal gates and railings
• Fences and outdoor metal fixtures
• Metal garden furniture and decorative items
• Previously painted or bare steel surfaces after proper preparation

Key specifications

• Finish: textured hammered metallic
• Colour: brown
• Volume: 0.7 litre
• Application: by brush, roller or suitable spray equipment
• Surface compatibility: prepared ferrous metal (steel, iron)
• Durability: formulated for corrosion protection in outdoor and indoor use

How to use

Prepare the metal surface by removing loose rust, flaking paint, dirt and grease; use wire brushing, sanding or appropriate chemical cleaners where necessary. Ensure the surface is dry and free of contaminants before application. Stir the paint thoroughly before and during use to maintain a uniform hammered effect. Apply evenly with a brush or roller in thin coats, or use suitable spray equipment following manufacturer spray guidelines. Allow recommended drying time between coats and avoid applying in wet or freezing conditions.

Usage recommendations

For best results on outdoor items, apply on a dry day with ambient temperatures within the suggested range and ensure adequate surface preparation. Test on a small area if applying over existing coatings. For long-term protection, consider applying two coats and perform periodic inspections for touch-ups where surface damage or corrosion appears.