Network Video Recorder Hikvision DS-7604NXI-K1/4P(D) 1U 4-channel PoE, 4x PoE, SATA III, 16 TB max, HDMI, VGA

Hikvision DS-7604NXI-K1/4P(D) is a 1U, 4-channel network video recorder with four built-in PoE ports for direct connection of IP cameras. The recorder supports video up to 4000 × 3000 pixels, SATA III hard drives up to 16 TB, and provides HDMI and VGA video outputs. It includes two USB 2.0 ports, audio input and output, four alarm inputs and one alarm output. The unit is rack-mountable, operates in temperatures from -10 to 55 °C and connects to networks at 10/100/1000 Mbit/s. Typical power consumption is 10 W and the unit is finished in black.

Advantages

The recorder combines four PoE ports for simplified camera installation with support for high-resolution recording and large internal storage via SATA III. Multiple video outputs (HDMI and VGA), onboard audio and alarm interfaces allow integration into monitoring setups. Compact 1U rack size and low typical power consumption make it suitable for space-conscious installations.

Suitable for

• Small to medium CCTV installations with up to four IP cameras
• Server rack or cabinet mounting in offices or retail locations
• Applications requiring local HDMI or VGA monitoring
• Setups needing on-device storage with a single SATA III drive up to 16 TB

Key specifications

• Channels: 4 video input channels
• PoE: 4 PoE ports for direct camera power and data
• Maximum video resolution: 4000 × 3000 pixels
• Storage interface and capacity: SATA III, up to 16 TB
• Network: Ethernet 10/100/1000 Mbit/s, 5 RJ-45 ports
• Video outputs: 1 HDMI output, 1 VGA output
• USB: 2 × USB 2.0 ports
• Audio: 1 × audio input (RCA), 1 × audio output (RCA)
• Alarm I/O: 4 alarm inputs, 1 alarm output
• Power: Output voltage 48 V, output current 1.35 A, typical consumption 10 W
• Operating conditions: temperature -10 to 55 °C, relative humidity 10–90%
• Dimensions (W×D×H): 320 × 240 × 48 mm
• Colour and mounting: Black, rack-mountable 1U form factor

How to use

Install the recorder in a standard 19-inch rack or place it on a flat surface. Connect IP cameras directly to the built-in PoE ports using network cables; cameras will receive power and data over the same cables. Insert a SATA III hard drive (up to 16 TB) for local recording, then connect a monitor to the HDMI or VGA output for local viewing and configuration. Use the USB ports for backup or peripheral devices. Configure network settings and recording parameters through the recorder’s web interface or client software, and connect alarm and audio wiring as required.

Usage recommendations

For reliable long-term recording, use a surveillance-grade SATA HDD and follow local regulations for electronic waste disposal when decommissioning the unit.