IP security camera Hikvision DS-2CD1047G2H-LIUF/SL 4 MP, 2.8 mm lens, 2560x1440, PoE, IP67, IR 30 m

Compact IP security camera Hikvision DS-2CD1047G2H-LIUF/SL with a 4 MP CMOS sensor and a fixed 2.8 mm lens. The camera records up to 2560 × 1440 pixels at 25 fps and supports H.264+ compression. It features 120 dB WDR, built-in microphone, face detection, video motion detection and onboard storage support for microSDXC cards up to 512 GB. The camera is housed in a metal IP67-rated enclosure and supports both Power over Ethernet (IEEE 802.3af) and 12 V DC power input.

Advantages

The camera provides high-resolution 4 MP imaging with wide dynamic range for improved detail in mixed lighting, onboard IR illumination for night monitoring up to 30 m, and robust IP67 metal housing for outdoor use. PoE support simplifies installation while ONVIF and common APIs enable integration with compatible NVRs and VMS platforms.

Suitable for

• Outdoor perimeter monitoring
• Small business entrances and parking areas
• Residential property surveillance
• Integration into third-party video management systems (ONVIF)

Key specifications

• Image sensor: 4 MP CMOS, 1/3" / 1/2.8" optical size, progressive scan
• Maximum resolution and frame rate: 2560 × 1440 at up to 25 fps
• Lens: 2.8 mm fixed, diagonal view 114°, horizontal 96°, vertical 52°
• Video compression: H.264+; bit rate 32 Kbps – 8 Mbps; CBR/VBR; ROI encoding
• Wide Dynamic Range (WDR): 120 dB
• Night vision: IR LEDs, 850 nm wavelength, effective to 30 m, minimum illumination 0 lx
• Pan/tilt range: pan 0–355°, tilt 0–90°
• Audio: built-in microphone, SNR 52 dB
• Local storage: microSDXC support up to 512 GB
• Power: PoE (IEEE 802.3af) and 12 V DC (DC output current 0.6 A)
• Network: Ethernet 10/100 Mbit/s, QoS support, ONVIF compatibility (Profile S/T/G), ISAPI, SDK
• Environmental ratings: IP67, operating temperature −30 °C to 60 °C, operating humidity 0–95%
• Dimensions & weight: approx. 179 × 69.1 × 67.4 mm, weight 320 g

How to use

Mount the camera on a stable surface using appropriate fasteners and route network and power cabling according to site requirements. Connect the camera to a PoE switch or provide 12 V DC power. Insert a compatible microSDXC card for local recording if needed and configure video settings, motion detection, and network parameters via the camera web interface or supported VMS/NVR using ONVIF or the supplied SDK/ISAPI. Adjust viewing angle and focus as required and verify night-vision operation in low-light conditions.

Usage recommendations

Avoid direct water contact to the camera electronics; although the enclosure is IP67-rated, install with correct sealing of cable entries and follow local electrical safety regulations. For reliable remote monitoring, use a stable network connection and regularly check firmware updates and storage health.