Bracket Hikvision BRACKET C white — wall/ceiling bracket, 63×75×120.9 mm, 1 pc

Hikvision BRACKET C is a white wall/ceiling mounting bracket supplied as a single piece. With compact dimensions of 63×75×120.9 mm, it is intended to secure compatible outdoor detectors and small devices where a fixed, low-profile mounting solution is required. The bracket set for these detectors includes two functional variants: an angle bracket for permanent 45° installations and a ball-joint swivel bracket that provides broad vertical and horizontal adjustment options, enabling precise alignment to the monitored zone. Each bracket includes an anti-tamper mechanism to detect attempts to detach the device from its mounting surface.

Advantages

The bracket offers a compact footprint and a durable design suitable for wall or ceiling attachment. The ball-joint swivel model provides adjustable aiming with horizontal movement up to 90° and vertical movement up to 60°, while the angle model fixes the detector at a 45° tilt when a permanent orientation is needed. Both variants include a tamper switch to signal removal attempts, and the white finish matches common outdoor detector housings for a discreet installation.

Suitable for (tasks / use cases)

• Mounting outdoor detectors on flat surfaces such as walls or rectangular pillars
• Fixed-angle installations requiring a 45° tilt relative to the mounting surface
• Installations requiring adjustable aiming to align the detector with the detection zone
• Setups that need tamper detection for enhanced physical security

Key specifications

• Material finish: white
• Overall dimensions: 63 mm (width) × 75 mm (depth) × 120.9 mm (height)
• Bracket variants: angle bracket (fixed 45° tilt) and ball-joint swivel bracket (horizontal ±45° up to 90° total, vertical ±30° up to 60° total)
• Mounting options: wall or ceiling
• Integrated tamper switch to detect removal attempts; swivel bracket includes three wires for connecting to NC or NO circuits
• Supplied quantity: 1 piece

How to use

Select the appropriate bracket variant for your installation: use the angle bracket when a permanent 45° orientation is required or the ball-joint swivel bracket when adjustable aiming is needed. Attach the bracket to a flat mounting surface (wall, rectangular pillar, or inside corner for the angle type) using suitable fasteners for the substrate. Mount the compatible detector to the bracket and, for the swivel type, adjust horizontal and vertical angles to align the detection zone. Connect the tamper switch wiring to the alarm panel or circuit, choosing NC or NO configuration according to your security system requirements. Verify mechanical stability and that the detector’s field of view is unobstructed.

Usage recommendations

Use corrosion-resistant fasteners appropriate for the installation surface and follow the detector manufacturer’s guidance for mounting height and field-of-view. Test the tamper circuit after installation to confirm it registers removal attempts, and periodically inspect the bracket and fastenings to ensure continued secure attachment.