Drill bit for rotary hammers HOGERT HT6D490, SDS+ shank, 110 mm length

HOGERT HT6D490 drill bit for rotary hammers with an SDS+ shank and 110 mm length is designed for drilling in concrete, masonry and natural stone using compatible SDS+ rotary hammers. The bit features a chisel-style tip geometry and a secure SDS+ connection that enables fast, tool-free changes and reliable engagement with the rotary hammer chuck. Its length and construction make it suitable for common construction and renovation drilling tasks where precise, durable performance is required.

Advantages

The SDS+ shank ensures stable retention in the rotary hammer chuck and reduces slippage during heavy-duty impact drilling. The tip geometry is optimized for efficient material removal in concrete and masonry, which helps maintain drilling speed and reduces the need for repeated re-centering. The 110 mm working length provides a balance between reach and control for typical installation and repair tasks. Made to industry-typical dimensions, this HOGERT bit is compatible with a wide range of SDS+ rotary hammers.

Suitable for

• Drilling holes in concrete for anchors and dowels
• Creating openings in masonry and brickwork
• Installing fixtures in natural stone and similar substrates
• General construction, renovation, and installation work

Key specifications

• Shank type: SDS+
• Overall length: 110 mm
• Tip geometry: chisel-style for masonry and concrete
• Intended materials: concrete, masonry, natural stone
• Compatibility: designed for use with SDS+ rotary hammers

How to use

Select an appropriate SDS+ rotary hammer and secure the drill bit by inserting the shank into the chuck until it locks. Set the tool to the hammer-drilling mode and apply steady pressure while allowing the tool’s percussive action to advance the bit. For deeper holes, periodically withdraw the bit to clear debris and reduce heat buildup. After finishing, switch off the rotary hammer and allow the bit to cool before removing it from the chuck.

Usage recommendations

Use appropriate personal protective equipment such as eye protection, hearing protection and gloves. Match drill diameter and working length to the anchor or fixture specifications. Avoid excessive lateral force on the bit to prevent premature wear; for prolonged drilling in hard materials, allow periodic cooling and use light lubricant or compressed air to clear dust if compatible with the work environment.