Abrasive sanding disc on cloth backing 150 mm G150, HOGERT (5 pcs)

Abrasive sanding disc on cloth backing 150 mm G150, HOGERT (5 pcs) is a set of five 150 mm abrasive discs with a cloth backing and grit G150 designed for medium-fine sanding tasks. The cloth backing offers improved flexibility and tear resistance compared with paper discs, allowing use on contoured surfaces and providing more even material removal on wood, paint, filler and metal. Discs are intended for use with backing pads or holders and are suitable for both hand-held orbital and rotary sanders as well as manual sanding.

Advantages

The cloth-backed construction increases durability and resists tearing under moderate pressure, while the G150 grit balances material removal and surface finish for smoothing and preparation. A 150 mm diameter fits common backing plates and provides consistent contact area for uniform sanding. Supplied as a pack of five, the set reduces the need for frequent replacements during small to medium projects.

Suitable for (tasks / use cases)

• Sanding and smoothing wood surfaces prior to finishing
• Removing old paint or primer and preparing surfaces for repainting
• Sanding filler and putty to shape and achieve an even surface
• Light deburring and surface conditioning of metal parts
• Use with orbital or rotary sanders and manual sanding blocks

When it may not be suitable

These G150 discs are intended for medium-fine sanding; they are not designed for aggressive stock removal where coarse grits are required. They may wear faster when used continuously on very hard materials or under excessive pressure. For ultra-fine finishing or polishing, a finer grit would be more appropriate.

Key specifications

• Disc diameter: 150 mm
• Abrasive grit: G150 (medium-fine)
• Backing material: cloth
• Quantity in pack: 5 pieces
• Compatible with: 150 mm backing pads, orbital and rotary sanders, manual sanding holders

How to use

Attach the disc to a compatible 150 mm backing pad or holder following the sander manufacturer’s instructions. Start sanding with light to moderate pressure, moving the sander evenly across the surface to avoid gouging. For hand sanding, fix the disc to a sanding block or wrap it around a suitable backing and work with steady, controlled strokes. Replace the disc when abrasiveness decreases or the cloth backing shows significant wear.

What to consider before purchase

• Ensure your sander or backing pad supports 150 mm discs
• Confirm that G150 grit matches the required level of material removal and surface finish
• Assess whether a cloth-backed disc is preferable to paper-backed discs for flexibility and durability

Usage recommendations

For best results, test the disc on a scrap piece of the same material to verify finish and removal rate. Use progressively finer grits after initial sanding to achieve a smoother surface. Clean the surface of dust between grit changes and avoid excessive pressure to prolong disc life.