Bar Clamp högert technik HT3B920 — woodworking clamp 1000 x 120 mm

Bar clamp högert technik HT3B920 — woodworking clamp 1000 x 120 mm is a fixed-bar clamp designed to secure workpieces with a 1000 mm bar length and a maximum 120 mm throat depth. It is intended for holding boards, panels and assemblies during gluing, routing, edge joining and general woodworking tasks where steady, distributed clamping pressure is required. The clamp combines a long steel bar with an adjustable jaw to maintain alignment and pressure across larger surfaces.

Advantages

The clamp offers a long 1000 mm span that enables clamping of wide panels and assemblies while the 120 mm throat provides reach for edges and deeper workpieces. A sturdy fixed bar and an adjustable sliding jaw deliver stable, even pressure to reduce movement during glue curing or machining. The tool is suitable for repetitive use in a workshop environment where consistent holding force and simple operation are needed.

Suitable for

• Gluing long boards and edge joints
• Securing panels for routing or trimming
• Assembling furniture components and frames
• DIY and carpentry projects requiring long-span clamping

Key specifications

• Bar length: 1000 mm
• Maximum throat/reach: 120 mm
• Type: fixed bar woodworking clamp
• Adjustable sliding jaw for variable clamping positions
• Intended use: gluing, assembly and holding workpieces during machining

How to use

Position the fixed jaw of the högert technik HT3B920 against one edge of the workpiece and slide the movable jaw along the bar until it contacts the opposite face. Tighten the clamp using the handle or screw mechanism until the required pressure is achieved without over-compressing the workpiece or squeezing out excessive glue. For long panels, use two or more clamps spaced evenly to distribute pressure along the joint. Release by loosening the mechanism and sliding the movable jaw away from the workpiece.

Usage recommendations

Use protective pads between the clamp jaws and finished surfaces to avoid marking, apply moderate, even pressure during glue curing, and check alignment before full tightening. Store the clamp in a dry place to prevent corrosion and inspect moving parts regularly for smooth operation.