Audio cable Hosa CYX-402M — 2 m, 3.5mm TRS (male) to 2 × XLR 3-pin (male), black, OFC, magnetically shielded

Hosa CYX-402M is a 2 m audio cable with a 3.5 mm TRS (male) connector on one end and two XLR 3-pin (male) connectors on the other. Designed to split an unbalanced stereo mini‑jack output into two balanced XLR lines, this cable is intended for connecting portable media players, laptops, smartphones or other devices with a 3.5 mm TRS output to professional mixing consoles, powered speakers or audio interfaces. The cable body is black and constructed with oxygen‑free copper (OFC) conductors and magnetic shielding to reduce interference and preserve signal clarity.

Advantages

The design combines a compact 3.5 mm TRS plug with dual male XLR outputs to facilitate straightforward stereo-to-dual-balanced connections without adapters. OFC conductors improve conductivity and help maintain audio fidelity across the 2 m length, while magnetic shielding reduces hum and electromagnetic interference in studio, live or AV environments. The cable’s black finish provides unobtrusive appearance and professional look.

Suitable for

• Connecting portable media players or laptops to mixing consoles
• Feeding stereo consumer outputs into two balanced XLR inputs for live sound or recording
• DJ setups requiring a mini‑jack source to XLR inputs
• AV installations where a compact stereo source must be routed to pro audio equipment

Key specifications

• Cable length: 2 m
• Connector A: 3.5 mm TRS (male)
• Connector B: 2 × XLR 3‑pin (male)
• Conductor material: Oxygen‑free copper (OFC)
• Shielding: Magnetic shielding for reduced interference
• Colour: Black

How to use

Insert the 3.5 mm TRS plug into the headphone or line output of the source device, ensuring a firm connection. Plug the two XLR male connectors into the left and right XLR inputs of the mixer, amplifier or powered speaker; observe channel labeling to maintain correct stereo orientation. Use moderate cable routing practices to avoid sharp bends or prolonged stress at connector joins. For devices with a mono output or single‑channel application, use only the corresponding XLR connector as required.

Usage recommendations

To minimize noise and interference, avoid running the cable parallel to power cords and keep it clear of wireless transmitters or strong magnetic fields. When connecting consumer devices with variable headphone volume, set the source output to a safe level and adjust gain on the receiving equipment to prevent clipping. Periodically inspect connectors for wear and clean contacts if needed to maintain reliable connections.