Audio cable Hosa STX-110M — 3 m, 6.35 mm TRS (male) to XLR 3-pin (male), black

Hosa STX-110M is a 3 m audio cable with a 6.35 mm TRS (male) connector on one end and a 3-pin XLR (male) connector on the other. The cable uses oxygen-free copper conductors and nickel-plated contacts, and is intended for routing balanced or unbalanced analog signals between instruments, mixers, preamps and audio interfaces in studio and live sound environments. Its black jacket provides a neutral appearance compatible with most setups.

Advantages

The combination of oxygen-free copper conductors and nickel-plated contacts ensures reliable signal transfer and resistance to corrosion. A 3 m length offers flexibility for typical stage and studio layouts without excessive slack. The cable supports both balanced and unbalanced analog connections when matching equipment allows, enabling use between balanced phone outputs and XLR inputs. The straightforward construction and standard connector types make the cable easy to integrate with a wide range of professional audio equipment.

Suitable for

• Connecting instruments or line-level sources with 6.35 mm TRS outputs to devices with 3-pin XLR inputs
• Routing audio between mixers, preamps and audio interfaces in studio recordings
• Stage and live sound setups where a balanced or unbalanced analog path is required
• Short to medium cable runs in rehearsal spaces and small venues

Key specifications

• Cable length: 3 m
• Connector A: 6.35 mm TRS (male)
• Connector B: XLR 3-pin (male)
• Conductor material: oxygen-free copper (OFC)
• Contact plating: nickel-plated contacts
• Colour: black
• Signal type: supports balanced and unbalanced analog signals

How to use

Determine the input and output devices that require connection and confirm whether balanced or unbalanced wiring is appropriate for both ends. Insert the 6.35 mm TRS male plug into the phone output of the source device and plug the 3-pin XLR male connector into the XLR input of the destination device, ensuring secure seating. Route the cable to minimise tension and prevent sharp bends; avoid running parallel and close to mains power cables to reduce interference. Test the signal path at low volume before use and adjust levels on the connected devices as needed.

Usage recommendations

For best performance, use this cable where the source provides a balanced TRS output or where a direct TRS-to-XLR connection is specified by the equipment manufacturer. Keep cable lengths reasonable for the application and inspect connectors periodically for corrosion or wear. If ground lift or polarity changes are required, consult equipment documentation or a qualified audio technician rather than modifying the cable.