Internal SATA Hard Drive HP DNJ-T790/T795/T1300 500GB 7200RPM

Internal SATA Hard Drive HP DNJ-T790/T795/T1300 500GB 7200RPM is a 3.5-inch SATA storage device designed for installation into compatible desktop or server systems. With a 500GB capacity and a 7200 RPM spindle speed, this drive serves as primary or secondary storage for operating systems, applications and user data. It is intended for replacement or upgrade in systems that support the listed HP models and fits into standard SATA drive bays using a SATA interface for data transfer and power via standard connectors.

Advantages

The drive provides a balance of storage capacity and rotational performance suitable for general computing and many business applications. Its 7200 RPM spindle speed offers faster average read/write access times compared with lower-speed drives, while the 500GB capacity supports installation of an operating system plus applications and substantial user data. The SATA interface ensures broad compatibility with motherboards and RAID controllers that accept standard SATA drives. Installation into compatible HP systems is straightforward, and the drive can be used as either a boot device or additional data storage.

Suitable for

• Replacing a failed or aging internal drive in compatible HP desktop or server models
• Upgrading storage capacity for operating system and application installations
• Adding secondary storage for user files, logs or backups in systems with available SATA bays
• Use in standard SATA-based RAID arrays where supported by the host system

Key specifications

• Form factor: internal SATA drive (3.5-inch form factor typical for desktop/server installations)
• Capacity: 500 GB usable storage
• Rotational speed: 7200 RPM
• Interface: SATA (serial ATA) for data transfer and power via standard connectors
• Typical use: primary or secondary internal storage for operating systems, applications and data

How to use

Install the drive into an available 3.5-inch SATA bay in a compatible desktop or server chassis. Secure the drive using appropriate mounting screws or tool-less brackets, connect the SATA data cable to the motherboard or RAID controller and the SATA power connector from the power supply. After physical installation, initialize and partition the drive in the host operating system or system BIOS/UEFI as required, then format and install the operating system or transfer data. Follow system-specific instructions for configuring RAID or boot order if the drive is intended as a boot device.

Usage recommendations

Select this 500GB 7200RPM internal SATA drive when you need reliable general-purpose storage with improved access performance compared to lower-RPM drives. Ensure your system firmware and hardware explicitly support the listed HP models before installation, verify available SATA ports and power connectors, and back up important data prior to replacing an existing drive. For critical server environments, consider redundancy or RAID configurations and monitor drive health using system diagnostics or SMART tools.