Brass 90° Elbow Fitting IBP 15 x 1/2 (female) – IBP BRAZ KOLANO 90 GW

IBP BRAZ KOLANO 90 GW is a brass 90° elbow designed to connect 15 mm metric pipe systems to fittings with a 1/2" female threaded outlet. The fitting provides a compact right-angle change of direction suitable for heating, water supply and sanitary installations. Constructed from brass, it is intended for use in soldered or threaded assemblies where a transition from a 15 mm pipe to a 1/2" threaded component is required.

Advantages

The brass construction offers good corrosion resistance and mechanical strength for typical domestic and light commercial plumbing applications. Its 90° geometry enables a compact installation in confined spaces and simplifies routing of piping runs. Compatibility with 15 mm metric piping and 1/2" female threaded components reduces the need for additional adaptors when integrating different connection standards.

Suitable for

• Residential and commercial heating systems
• Cold and hot water supply lines
• Sanitary fixtures requiring a 15 mm to 1/2" transition
• Replacement or retrofit work in restricted spaces

Key specifications

• Material: brass
• Angle: 90 degrees
• Connection types: 15 mm metric pipe to 1/2" female thread
• Application: soldered or threaded assembly compatible
• Typical use environments: heating, potable water, sanitary systems

How to use

Prepare the 15 mm pipe end by cutting square and deburring. For soldered installation, clean and flux the pipe and fitting surfaces according to standard plumbing practice, assemble the joint and apply heat to achieve a reliable soldered connection. For threaded assembly, ensure the 1/2" male thread on the mating component is clean and use appropriate PTFE tape or thread sealant before hand-tightening and then final tightening with suitable tools. Verify alignment at the 90° joint and check for leaks after system pressurization.

Usage recommendations

Use compatible pipe materials and fittings rated for the intended operating temperature and pressure. When installing in potable water systems, follow local regulations and flushing procedures after soldering. If unsure about soldering or thread sealing, consult a qualified plumber to ensure proper installation and leak-free performance.