Filament spool iLike C1 PLA 1.75 mm 10 m Transparent for 3D printing

iLike C1 PLA filament, transparent, 1.75 mm diameter and 10 m length, is designed for FDM/FFF 3D printers that accept 1.75 mm filament. The material is standard polylactic acid (PLA) with a translucent finish that enables light transmission and visual layering. This spool is intended for short runs, sample prints, prototyping and small decorative elements where a clear or semi-clear appearance is required.

Advantages

The filament offers good dimensional stability and low warp tendency typical of PLA, allowing predictable results on most consumer and prosumer 3D printers. Its transparent color provides a clear or frosted look depending on layer thickness and print settings, useful for parts that need a see-through effect. The 1.75 mm diameter helps maintain consistent extrusion on printers calibrated for that filament size, and the 10 m length makes this spool practical for testing materials or producing a limited number of parts without large storage requirements.

Suitable for

• Prototypes and proof-of-concept models requiring visibility through parts
• Decorative items, lampshades and light-diffusing components
• Hobbyist projects, scale models and display pieces
• Short-run prints, material tests and printer calibration samples

Key specifications

• Material: PLA (polylactic acid), translucent
• Diameter: 1.75 mm nominal
• Length: 10 m
• Color/finish: Transparent / translucent
• Form: Spool for FDM/FFF 3D printers

How to use

Load the filament onto a 3D printer that supports 1.75 mm PLA filament. Set the nozzle temperature according to your printer and PLA manufacturer's general recommendations (commonly 190–220 °C) and use a bed temperature appropriate for PLA (often unheated or 40–60 °C if available). Adjust print speed and layer height to achieve the desired transparency and surface finish: slower speeds and thinner layers typically increase clarity. Ensure the filament path is free of sharp bends and the spool can rotate smoothly during extrusion.

Usage recommendations

For improved translucency, print with thinner layers and higher extrusion temperatures within safe PLA limits. Store the spool in a dry environment and avoid prolonged exposure to humidity to preserve print quality. When producing functional parts, verify mechanical suitability of PLA for the intended load and environment before final use.