PLA 1.75 mm filament 10 m, iLike C1, Green

iLike C1 PLA filament in 1.75 mm diameter and 10 m length, green color, is formulated for use with FDM/FFF 3D printers that accept 1.75 mm filament. The material offers the typical properties of PLA: low tendency to warp, straightforward extrusion behavior and a smooth surface finish on printed parts. The compact 10 m spool is intended for short prints, prototypes, calibration models and decorative pieces where color matching and material ease-of-use are important.

Advantages

The filament provides consistent diameter and melt flow suitable for standard PLA printing temperatures. Its low-warp characteristics reduce the need for heated bed adhesion aids on small parts, while the green pigment yields uniform color across layers. The 1.75 mm diameter is compatible with a wide range of consumer and prosumer FDM/FFF printers, and the short 10 m length is convenient for testing settings or producing single small objects without committing to a full spool.

Suitable for

• Prototyping and proof-of-concept parts
• Small decorative models and figurines
• Printer calibration prints and filament tests
• Educational projects and hobbyist prints

Key specifications

• Material: PLA (polylactic acid)
• Diameter: 1.75 mm
• Length: 10 m
• Color: green
• Form: wound filament on a small spool
• Compatibility: standard FDM/FFF 3D printers accepting 1.75 mm filament

How to use

Load the 1.75 mm filament into the printer according to the manufacturer's filament loading procedure, ensuring the filament path is free of snags and the spool rotates smoothly. Set the extruder temperature to typical PLA range (approximately 180–220 °C) based on your printer and nozzle size, and use a print speed and retraction settings suitable for PLA. For small prints on an unheated bed, apply a glue stick or use blue painter’s tape if additional adhesion is required. Monitor the first layer to confirm proper extrusion and bed adhesion before proceeding with the print.

Usage recommendations

Store the filament in a dry environment away from direct sunlight and high humidity; use desiccant if storing long-term. When switching between filament types or colors, purge the hotend to avoid cross-contamination. Adjust print temperature and cooling based on observed surface finish and stringing; reduce temperature slightly if stringing occurs, or increase cooling for sharper details.