PLA Filament Wire iLike C1 1.75 mm 10 m Gray spool for 3D printing

iLike C1 PLA filament wire in 1.75 mm diameter on a compact 10 m gray spool is designed for FDM/FFF 3D printers that accept 1.75 mm PLA. The filament offers easy extrusion, low warp characteristics and a smooth surface finish suitable for prototypes, scale models and hobby parts. The short, 10 m spool format is convenient for test prints, calibration, color accents and small production runs where minimal storage and fast material changes are desired.

Advantages

The PLA formulation provides stable flow through standard hotends at typical PLA temperatures, enabling reliable layer adhesion and reduced stringing when used with appropriate printer settings. The 1.75 mm diameter ensures compatibility with the majority of hobby and desktop FDM printers. The gray color delivers neutral, paint-ready surfaces and consistent appearance across short print jobs. The small spool size minimizes material waste for single-part projects and simplifies filament management.

Suitable for

• Prototyping small mechanical parts and visual mock-ups
• Calibration prints and printer setting tests
• Scale models, miniatures and hobby components
• Color accents and short-run decorative items

Key specifications

• Material: PLA (polylactic acid)
• Diameter: 1.75 mm
• Length: 10 m
• Color: Gray
• Spool type: Compact small-format spool for short prints
• Recommended extrusion: standard PLA temperature range (consult printer manual)

How to use

Load the 1.75 mm PLA filament into the printer following the manufacturer's filament loading procedure. Set nozzle temperature to the PLA range recommended by your printer or hotend manufacturer and allow the nozzle to reach target temperature before extrusion. Use a heated bed if required by your print profile, typically set modestly or left off for PLA depending on adhesion method. Adjust print speed, retraction and cooling settings for the best surface finish and to minimize stringing. Because the spool contains 10 m of filament, monitor remaining filament length during multi-part jobs to avoid mid-print shortages.

Usage recommendations

Store the remaining filament in a dry place or sealed container with desiccant to prevent moisture uptake. For best results on small prints, enable part cooling and use lower layer heights to enhance surface detail. When changing colors or filament types, purge the nozzle to avoid cross-contamination.