Cutting Disc for Steel Inco Flex Type 41 125×1.6×22.23 mm (M41-125-1.6-22A46T)

Inco Flex Type 41 cutting disc for steel, size 125×1.6×22.23 mm, is a thin abrasive wheel designed for precise cutting of steel and other ferrous metals. The 1.6 mm cutting thickness produces a narrow kerf that reduces material loss and allows accurate cuts on pipes, profiles, sheet metal and fabricated parts. This Type 41 disc fits angle grinders with a 22.23 mm bore and is suitable for workshop, metalworking and construction environments where controlled, clean cuts are required.

Advantages

The disc provides a balance of cutting speed and control due to its thin 1.6 mm rim and abrasive formulation tailored for steel. Its Type 41 flat profile ensures stable engagement with the workpiece and predictable cutting lines. Compatibility with 22.23 mm bore grinders makes it widely usable across common angle grinder models, while the narrow kerf reduces heat build-up and minimizes burr formation on cut edges.

Suitable for

• Cutting steel pipes and tubes
• Trimming metal profiles and frames
• Separating sheet metal and panels
• Cutting small welded assemblies and metal parts
• On-site construction and workshop metal cutting tasks

Key specifications

• Disc type: Type 41 (flat cutting disc)
• Diameter: 125 mm
• Cutting thickness: 1.6 mm (narrow kerf)
• Bore diameter: 22.23 mm
• Material application: steel and ferrous metals

How to use

Mount the disc on an angle grinder with a matching 22.23 mm arbor and ensure the machine is switched off and unplugged during installation. Use the correct guard and fasten the disc according to the grinder manufacturer’s instructions. Start the grinder and allow it to reach full speed before engaging the cut. Apply steady, even pressure and maintain a consistent cutting angle; avoid twisting or side-loading the disc. Do not exceed the disc's rated maximum speed and replace the disc if it shows cracks, glazing or excessive wear.

Usage recommendations

Wear appropriate personal protective equipment including safety goggles, face shield, gloves, and hearing protection. Use clamps to secure workpieces and work in a well-ventilated area or local exhaust to reduce dust exposure. For thin materials, support the piece to prevent vibration and ensure clean cuts; for thicker sections, make multiple controlled passes if necessary rather than forcing the disc.