Cutting Disc for Metal Inco Flex M41-300-3.2-32A24R — 300×3.2×32 mm, A24RBF

Flat cutting disc for metal from Inco Flex, model M41-300-3.2-32A24R. This abrasive wheel has a 300 mm diameter, 3.2 mm cutting thickness and a 32 mm centre hole. The A24RBF abrasive specification is formulated for cutting steel and various metal sections. The disc is designed for use with angle grinders to produce straight, clean cuts in metalworking, construction and fabrication applications.

Advantages

The disc construction provides a balance of cutting speed and wheel life for general metal cutting tasks. A robust bonding matrix with a resin-bonded abrasive ensures consistent cutting performance and dimensional stability during operation. The 3.2 mm thickness reduces material waste while maintaining sufficient strength to resist premature cracking or chipping under normal usage. Compatibility with common 32 mm bore angle grinders simplifies mounting and changeover on workshop tools.

Suitable for

• Cutting mild and structural steel
• Cutting metal profiles, pipes and sections
• On-site construction and metal fabrication tasks
• Workshop use with angle grinders for straight cuts

Key specifications

• Diameter: 300 mm
• Cutting thickness: 3.2 mm
• Bore diameter: 32 mm
• Abrasive type: A24RBF (resin-bonded abrasive formulation for metal)
• Disc form: flat cutting wheel suitable for angle grinders

How to use

Mount the disc on a compatible angle grinder with a 32 mm arbor and secure it according to the grinder manufacturer's instructions. Verify the disc is rated for the grinder's maximum speed and that the wheel is free of visible damage before use. Use appropriate cutting techniques: steady, controlled passes with moderate pressure, allowing the abrasive to do the work rather than forcing the disc. Maintain a correct cutting angle and ensure the workpiece is clamped or secured to prevent movement during cutting.

Usage recommendations

Always wear appropriate personal protective equipment: safety goggles or a face shield, hearing protection, gloves and protective clothing. Avoid lateral pressure or side grinding on the cutting disc. Store the discs flat in a dry environment and inspect each wheel before mounting. Follow local safety regulations and the angle grinder manufacturer's guidance.