Diamond Cutting Disc 125 mm x 1.9 mm x 22.2 mm, INDIAN PROFESSIONAL FAST CUT

Diamond cutting disc 125 mm x 1.9 mm x 22.2 mm by INDIAN PROFESSIONAL FAST CUT is a thin, high-speed diamond blade designed for precise cutting of hard building materials. With a 125 mm outer diameter, 1.9 mm cutting thickness and a 22.2 mm bore, this disc is made for use on compatible angle grinders and provides fast, accurate cuts in tiles, natural stone and concrete during renovation, construction and tiling work.

Advantages

The FAST CUT diamond rim delivers rapid material removal while maintaining a slim kerf for reduced material waste and lower load on the tool. The 1.9 mm blade thickness enables high cutting speed and precise line control, and the continuous diamond rim offers smooth edge quality on brittle materials. The 22.2 mm bore fits standard angle grinders, ensuring stable mounting and safe operation when used with appropriate guards and flanges.

Suitable for

• Cutting ceramic and porcelain tiles
• Trimming and shaping natural stone and marble
• Score-and-break cuts in concrete and cement-based materials
• Fast cuts required in renovation and tiling projects

Key specifications

• Outer diameter: 125 mm
• Blade thickness (kerf): 1.9 mm
• Bore (arbor) diameter: 22.2 mm
• Segment type: continuous diamond rim for smooth cuts
• Intended use: dry and wet cutting of hard materials such as tiles, stone and concrete

How to use

Mount the disc on an angle grinder with a matching 22.2 mm arbor and secure it using the correct flange and nut. Check the grinder’s maximum RPM and ensure it is compatible with the disc’s rated speed. For best results, steady the workpiece and make controlled forward passes without forcing the blade; allow the diamond rim to cut at its intended speed. Use water cooling if the disc and application allow wet cutting to reduce dust and extend blade life, and always follow manufacturer guidance for your specific tool.

Usage recommendations

Wear appropriate personal protective equipment including eye protection, hearing protection, gloves and a dust mask. Use the disc within the specified RPM limits, ensure secure mounting and use guards. For prolonged life and improved cut quality, avoid lateral pressure and let the blade run at full speed; when cutting very hard or reinforced materials consider multiple light passes rather than a single deep cut.