Diamond Cutting Disc 350 mm, INDIAN PROFESSIONAL, model IP7782, turbo segment for concrete and stone

Diamond Cutting Disc 350 mm by INDIAN PROFESSIONAL, model IP7782, is a turbo-segment blade designed for aggressive cutting of concrete, reinforced concrete and natural stone. The 350 mm diameter and turbo segment profile provide a balance of cutting speed and controlled chip removal, making the disc suitable for large angle grinders, floor saws and handheld saws with compatible flange. Intended for professional applications, this blade facilitates fast material removal, groove cutting and demolition tasks on construction sites and in workshops.

Advantages

The turbo segment geometry improves cutting speed and cooling while maintaining a stable cutting line, reducing the tendency to bind in dense materials. High-quality diamond grit in the bonding matrix ensures consistent performance and extended life under heavy use. The 350 mm size offers deeper cutting capacity compared with smaller blades, enabling through-cuts and deep grooves in concrete and stone. The disc is compatible with common construction saws and grinders that accept 350 mm blades and standard mounting flanges.

Suitable for

• Cutting reinforced concrete slabs and blocks
• Making grooves and channels in concrete and masonry
• Cutting natural stone, granite and hard aggregates
• Demolition and repair work on construction sites
• High-volume cutting in workshops and rental fleets

Key specifications

• Diameter: 350 mm
• Segment type: turbo-segment for aggressive cutting and enhanced cooling
• Primary materials: concrete, reinforced concrete, natural stone
• Typical mounting: for saws and angle grinders compatible with 350 mm blades and standard flanges
• Application profile: fast material removal, groove cutting, demolition

How to use

Install the blade on a compatible machine following the tool manufacturer's instructions and ensure the mounting flange and nut are clean and correctly tightened. Use appropriate personal protective equipment including eye, ear and respiratory protection. Start cutting at a steady feed rate without forcing the blade; allow the turbo segments to clear debris and cool naturally between continuous cuts. For reinforced concrete, maintain a controlled approach to avoid sudden contact with rebar; if rebar is encountered frequently, reduce feed speed and allow the blade to wear through. Regularly inspect the disc for cracks, uneven wear or damage and replace if any structural defects are detected.

Usage recommendations

Use water cooling where recommended by the machine and application to reduce dust and extend blade life; for dry cutting, perform intermittent cutting and ensure adequate dust extraction. Match cutting speed and feed to the hardness of the material and the capacity of the machine to achieve optimal performance and blade longevity.