Diamond Cutting Disc 115×1.6×22.2 mm, continuous rim — INDIAN PROFESSIONAL

Diamond cutting disc 115×1.6×22.2 mm with a continuous rim from INDIAN PROFESSIONAL is designed for precise slicing of ceramic, porcelain, tiles and similar hard materials. The 115 mm diameter and 1.6 mm thin kerf allow accurate straight cuts with minimal material waste. The 22.2 mm bore fits standard angle grinders and compatible tile cutters, enabling use in both handheld and machine-mounted applications. The continuous rim profile is optimized for clean edges and reduced chipping when cutting brittle materials, and the disc can be used for wet or dry cutting depending on the working conditions.

Advantages

The continuous rim construction produces smooth, chip-free edges on ceramic and porcelain, reducing the need for additional finishing. A thin 1.6 mm cutting width minimizes material removal, improving precision and efficiency. The disc’s balance and standard 22.2 mm arbor provide compatibility with a wide range of handheld angle grinders and tile cutters. Suitable for wet or dry cutting, the diamond segment bond is formulated to maintain cutting performance and durability under typical installation and renovation workloads.

Suitable for

• Precision cutting of ceramic tiles and porcelain
• On-site tile trimming and finishing during bathroom and kitchen installations
• Handheld angle grinder and compatible tile cutter applications
• Wet or dry cutting where reduced chipping is required

Key specifications

• Diameter: 115 mm
• Cutting thickness (kerf): 1.6 mm
• Bore (arbor) diameter: 22.2 mm
• Rim type: continuous
• Suitable materials: ceramic, porcelain, tiles and similar hard, brittle materials
• Use mode: wet or dry cutting

How to use

Securely mount the disc on a compatible angle grinder or tile cutter with a 22.2 mm arbor. Check that the disc is rated for the tool’s maximum RPM and that the direction arrow matches the tool rotation. When cutting, support the workpiece to prevent vibration and ensure steady feed at a controlled speed. For wet cutting, supply water to the cutting zone to reduce dust and heat; for dry cutting, periodically withdraw the disc to allow cooling and inspect for wear. Wear appropriate eye, respiratory and hand protection, and follow the tool manufacturer’s safety guidelines.

Usage recommendations

Use the disc for finishing and installation tasks where clean edges and minimal chipping are important. For long blade life and consistent results, prefer wet cutting where possible, avoid excessive force, and replace the disc when cutting performance noticeably declines.