Diamond Cutting Disc 125 mm x 2.0 mm x 22.2 mm, INDIAN PROFESSIONAL, Mosaic Cut

Diamond cutting disc 125 mm x 2.0 mm x 22.2 mm from INDIAN PROFESSIONAL is designed for precise, controlled cutting of mosaics, ceramic tiles and similar hard materials. The 125 mm diameter and 2.0 mm blade thickness produce a narrow kerf for accurate finishing cuts, while the 22.2 mm bore fits standard angle grinders with matching flanges. The mosaic cut segment pattern reduces chipping and helps maintain a clean cutting line for installation and renovation tasks.

Advantages

This INDIAN PROFESSIONAL diamond disc offers a balance of cutting precision and edge preservation. The thin 2.0 mm rim ensures minimal material waste and faster cut-through, while the mosaic cut segments promote chip-free edges on fragile tile surfaces. Compatibility with common 22.2 mm bores makes it easy to mount on most angle grinders; the disc construction is optimized for controlled feed and consistent performance on ceramics and similar hard materials.

Suitable for

• Cutting ceramic tiles and porcelain mosaics
• Precision trimming for tile installation and finishing
• Renovation work involving small-format and decorative tiles
• Angle grinder use where a narrow kerf and reduced chipping are required

Key specifications

• Diameter: 125 mm
• Blade thickness (rim): 2.0 mm
• Bore diameter: 22.2 mm
• Segment type: Mosaic cut
• Material suitability: ceramics, porcelain, mosaic and similar hard tiles

How to use

Mount the disc on an angle grinder with a compatible 22.2 mm flange and ensure the tool is disconnected from power while fitting. Secure the disc according to the grinder manufacturer's instructions and wear appropriate personal protective equipment (safety glasses, gloves, dust mask, ear protection). Use steady, even feed pressure; avoid excessive lateral force. For best results on tiles and mosaics, run the disc at the recommended operating speed of your grinder and, where applicable, use water cooling or a wet cutting method to reduce dust and improve edge quality.

Usage recommendations

Use moderate cutting speed and consistent pressure to minimize chipping. For fragile mosaics or thin tiles, consider a preliminary shallow pass before completing the full-depth cut. Regularly inspect the disc for wear and replace it when the diamond rim is visibly reduced or cutting performance decreases.