SATA Cable InLine 27705A 0.5m Red

InLine 27705A SATA cable, 0.5 m in red, is designed to connect SATA storage devices to a motherboard. It complies with the Serial ATA standard and supports 150/300/600 MB/s S-ATA links. The cable includes latches for secure connections and provides four data lines plus three detect lines to ensure reliable signal transmission in compact system layouts.

Advantages

The cable’s 0.5 m length is suitable for installations with limited space while maintaining signal integrity for SATA I/II/III devices. Latch connectors reduce the risk of accidental disconnection. Its red colour helps with internal cable identification. The construction follows the Serial ATA pinout with 7-pin connector for compatibility with standard SATA ports.

Suitable for

• Connecting internal SATA hard drives and SSDs to desktop motherboards
• Upgrading or building compact PC systems where short cable runs are required
• Replacing worn or damaged SATA data cables in existing PCs

Key specifications

• Manufacturer: InLine
• Model: 27705A
• Length: 0.5 m
• Colour: Red
• Connector: 7-pin Serial ATA
• Lines: 4 data lines, 3 detect lines
• Supported SATA speeds: 150/300/600 MB/s (SATA I/II/III)
• EAN: 4043718066964

How to use

Align the 7-pin connector with the SATA port on the motherboard and the corresponding port on the drive, ensuring the keyed side matches the port orientation. Gently push the connector until the latch clicks to secure the connection. For removal, press the latch to release and pull the connector straight out to avoid bending pins or stressing the cable. Route the cable to avoid sharp bends and prevent contact with hot components.

Usage recommendations

Use this SATA cable for internal data connections in desktop systems and small-form-factor builds. For optimal performance, avoid excessively long runs and replace the cable if the connectors or insulation show signs of wear.